Resolved! Detailed Incoming and Outgoing Calls
Does anyone know of a report that gives the most detailed level of data for incoming and outgoing calls?
Does anyone know of a report that gives the most detailed level of data for incoming and outgoing calls?
We have many Webex Room Kits throughout our institution and are in the process of moving to OS 11.9.3.1. Since moving to OS11, we've needed to disable the On Screen Display (OSD) in order to properly show a wallpaper with instructions for using the s...
Hi Community, I'm looking at designing a space and my question is can you direct the ceiling microphones towards each other or does this cause a problem? i've looked at every design showcasing them on Workspace and online and not once is there two ce...
Hi, we have a configuration with a Cisco Sx80 + Touch 10, 2 cisco P60 cameras, and a Creston 300 with an Android tablet and Creston Go Software.The monitors, Android Tablet, the Creston, are on a switch with a 172.xxx subnet and the cameras and the t...
We have one conference room with a Cisco Room Kit and a Touch10 connected with the MSTeams app on the home screen. The other conference room has an SX80 codec with another Touch10 tablet except this room's tablet does NOT have the Teams app. What is ...
Hey all, we're upgrading some of our conference rooms, and I have some P60 cameras are just getting shoved in a cupboard never to see the light of day again. The optics on these camera's is amazing, so it seems like a waste to me for this to happen. ...
Main issue: The Webex Room Kit Mini is pulling an IP address, but the TelePresence Touch unit, which is connected to the Room Kit's dedicated Touch port (which I assume acts at least as a pass-through network port) is not (it's getting a 169.254.x.x...
Cisco Expressway V. 14.3.4 Select. Where is the setting to disable a user account after X days of inactivity? Thanks
Is there a way to automatically stop sharing PC or laptop input after people leave the meeting. The system will not go into standby when pc or laptop is shared and room scheduler is lit up red as the room is being used. Is there some kind of macro ...
Hi Team, The UC setup we are using for B2B calls, the call flow is below- VC endpoint - CUCM-EXP C- EXP E- Cloud The Expressway is not in a cluster, only a single node is there. Now for the above, which certificates are mandatory? Thanks in advance. ...
I have cms 3.2 installedI have successfully installed the certificate chain which has client and server authentication.The webbridge3 url is not displaying any web page.error: c2w://cms.domain.com:9999 connection failed ..i have not been able to see ...
Hey Everyone, I need to find out the distance these devices can zoom to and how the resolution gets affected as you zoom in:Cisco Room USBCisco Room BarCisco Room KitCisco Room Kit PlusCisco Room Kit EQCisco Roon Kit ProI'm trying to see how well the...
I have two room kit EQ units with a USB to serial port adapter. This is connected to a Crestron controller via RS232. I am not getting RX response from the codec. The user LOGIN REQUIRED has been tested with ON/OFF. The baud rate and settings have be...
Hey there, we are currently setting up different Cisco devices (Room Bar, Board Pro,..) as MTRoA-devices. We have a Teams Rooms Pro license applied to each Teams-resource account and i am wondering what is the best effort for the firmware management ...
Hello Everybody, Scheduler 3.3 Beta is available natively with CMS (what a relief!) and works perfect (so far) with fantastic features (one of them: invite all coSpace members with one checkbox!).But does anybody know how to modify email template for...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-14-2024 11:26 PM | ||
04-02-2024 03:18 AM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |