EnvironmentRoom KitRoomOS 11.15.1.6Registered to WebexTouch 10After installing the RoomOS 11.15.1.6 update, my Touch 10 was unable to boot to the home screen, getting stuck at the Cisco logo screen and rebooting constantly. It did not have this issue...
Forum Posts
Main issue: The Webex Room Kit Mini is pulling an IP address, but the TelePresence Touch unit, which is connected to the Room Kit's dedicated Touch port (which I assume acts at least as a pass-through network port) is not (it's getting a 169.254.x.x...
Hi Community, I'm looking at designing a space and my question is can you direct the ceiling microphones towards each other or does this cause a problem? i've looked at every design showcasing them on Workspace and online and not once is there two ce...
Is the CAB-MIC20-EXT compatible with CS-CODEC-EQ- K9+?
Hey all, we're upgrading some of our conference rooms, and I have some P60 cameras are just getting shoved in a cupboard never to see the light of day again. The optics on these camera's is amazing, so it seems like a waste to me for this to happen. ...
Is there a way to automatically stop sharing PC or laptop input after people leave the meeting. The system will not go into standby when pc or laptop is shared and room scheduler is lit up red as the room is being used. Is there some kind of macro ...
Hello guys,In our company, we have a cluster CUCM 11.5 and a stand alone IM&P server.I would like to know if one you guys have already implement or install cisco jabber for mobile phone?Do I have to build a new IM&P server? How it works for mobile?Do...
Hello,When we connect a laptop to the Roombar using an USB-C cable. The Room Bar camera and speakers are accessible from the laptop but not the microphone.Is there a parameter to check in the Room Bar configuration?Thanks for your help.
Resolved! Cisco room kit and telepresence
Hey all,We have Cisco Room Kit that using with Touch Panel.They are not pairing with each other. Touch Panel find the Room kit and i try connects but can't. It says No loads file. It stuck connecting and this error:Cisco Room Kit's software version:...
Hi,teams I'm new to Codec Pro and trying to connect a PC to Codec Pro by using HDMI cable.The video is displayed on the screen perfectly but the audio doesn't work.(no sound)I'm using HDMI 1 and this is what I set the configuration of HDMI 1. Softwa...
Equipment: Webex Room Bar (on prem) connected to single 65" screen LG UHD Commercial DisplayIssue: "No Signal" showing on screen. Correct source selected (confirmed as the LG screen names the source as Cisco Codec and when the codec was rebooted i...
When I run reports or schedule out reports using the CSQ All-Fields Reports, the Abandonment Rate column seems to change the output.So if I run a report using <10 agents, the rate is fine. However if I pull for a team that's much larger, then it adds...
Hello everyone,I apologize in advance if I am forgetting details, as this is my first post here in the community.We have a weird bug with the SpeakerTracker camera from Cisco.The camera that is supposed to film the speaker moves to the right position...
Hello everyone I want to ask if what was the problem if when using usb audio port, the audio on music was load but when the we are in the meeting the audio are encountering weak or soft output audio.
We're trying to configure the Cisco Room Bar Pro to run in MS Teams Room. However, there is no option to configure it, even after updating it to the latest Cisco OS.
