Main issue: The Webex Room Kit Mini is pulling an IP address, but the TelePresence Touch unit, which is connected to the Room Kit's dedicated Touch port (which I assume acts at least as a pass-through network port) is not (it's getting a 169.254.x.x...
Forum Posts
We are experiencing problems with screen sharing when we join a meeting on a Cisco VC device through the MS Teams platform. However, we are able to successfully share our screen using our local device or laptop when joining the same MS Teams meeting ...
HeyAt work we have a Cisco Codec Plus and a Quad camera.We mostly use MS Teams, and then I saw this video online:https://www.youtube.com/watch?v=x5DQLGZ1oBs&t=686sAn admin can enable the function, connect a HDMI to a INOGINI device and audio from the...
hello all,I recently acquired an old precision 60 camera that was in a container with other broken items. I'm not sure what if anything if wrong with it, but I am trying to see if it works. I do not have the sx80 codec or any other hub for connecti...
Is there a way to automatically stop sharing PC or laptop input after people leave the meeting. The system will not go into standby when pc or laptop is shared and room scheduler is lit up red as the room is being used. Is there some kind of macro ...
We have a group policy on Conference Room PCs which keeps their monitor output enabled all the time, so end users won't be confused when they try to present a sleeping PC and don't see an image without waking it up first. The trade-off is that the co...
Hello, reading the datasheet and admin guides of a Roomkit EQ lead us to interpret that it cames with HDMI audio out, but after some tests our technician found that the audio is not working on HDMI outputs, only the embedded QuadCam speakers provides...
I'm trying to get a macro to run on a schedule every 30mins(for example) but couldn't figure out how to do it.I saw an example: https://github.com/CiscoDevNet/roomdevices-macros-samples/blob/master/Scheduler/Scheduler.jsI can see that this will perfo...
Hey Everyone, I need to find out the distance these devices can zoom to and how the resolution gets affected as you zoom in:Cisco Room USBCisco Room BarCisco Room KitCisco Room Kit PlusCisco Room Kit EQCisco Roon Kit ProI'm trying to see how well the...
Is the CAB-MIC20-EXT compatible with CS-CODEC-EQ- K9+?
We have a non networked Webex USB is connected to a single network connected PC which is used for MS Teams meetings. When it works, it is a fantastic solution. Unfortunately, we have an periodic issue, where the Webex USB speaker stops broadcasting...
I have two room kit EQ units with a USB to serial port adapter. This is connected to a Crestron controller via RS232. I am not getting RX response from the codec. The user LOGIN REQUIRED has been tested with ON/OFF. The baud rate and settings have be...
Hey there, we are currently setting up different Cisco devices (Room Bar, Board Pro,..) as MTRoA-devices. We have a Teams Rooms Pro license applied to each Teams-resource account and i am wondering what is the best effort for the firmware management ...
Hello, I have a Cisco Room Bar Pro running MS Teams Rooms (MTRoA) connected to two external displays in a conference room. when not in a call (local in person meeting) and share content from my laptop via HDMI, it only allows content on 1 screen and ...
We have many Webex Room Kits throughout our institution and are in the process of moving to OS 11.9.3.1. Since moving to OS11, we've needed to disable the On Screen Display (OSD) in order to properly show a wallpaper with instructions for using the s...
