Resolved! Cisco 6921 Phones and CUCM 6.1
We have bought some new 6921 Phones and want to know if I can use them on my CUCM 6.1.2.1000-13Are there instuctions?The phone does not appear in the Device Default list.Thank YouMatt
We have bought some new 6921 Phones and want to know if I can use them on my CUCM 6.1.2.1000-13Are there instuctions?The phone does not appear in the Device Default list.Thank YouMatt
Hi,Can anyone tell me if the 6921 supports CDR and CMR records??Or in general is there a way to find out which devices support CMR\CDRs???Thanks
Hello,anyone has information about the bandwidth requirement for a TP system with version 1.6?I would like to have the same as this link:http://www.cisco.com/en/US/docs/solutions/Enterprise/Video/tpqos.html#wp1065161but for version 1.6.Thank you very...
We may soon require CUBE/SBC functionality for our Telepresence system. Can we use a normal router running a CUBE IOS, or do we need to purchase a purpose built SBC? The traffic is not expected to exceed 100Mb/s or around 3 - 5 Telepresence sesison...
does anyone have experience using the wolfvision document camera solution with CTS1300 end points? How would it integrate with the wall mounted solution?
Dear All,I am beginner in voice and I need help to configure Dial-peers on cisco routers.between two router i can configure dial-peer and calling is successful but whet i create a scenario with multiple routers like Router R1, R2, R3 and R4.all route...
Hi,I'm trying to get the following working but I've been unsuccessful so far and wondered if its possible. Call flow I'm trying to achieve is below:DDI > AA with 3 options, then...1st and 2nd options are routed to external numbers, the 3rd option is ...
We have a 2811 router with H323 configuration with an extra FXS port; right now we use an ATA to connect the fax but I would rather use the FXS port and connect the fax machine directly to it. How would I configure the fxs port to support this and a...
According to the video conferecing design document [hxtp://www.cisco.com/en/US/docs/video/cuvc/design/guides/srnd/vc5xsrnd.html page 8-29. What are the issue of implmenting NAT for video conference?
Hi, I am facing a big problem with auto qos command.We are using on cisco ISR routers which are installed at leased line link of diffrenet bandwidths.voice and data are working on both routers. The problem is :- When i'm using auto qos voip o...
dear all,how to fix the delay in voip H323 protocol?????please!!!!!!!!!!!!!!!
Hi,i have a strange issue with Telepresence Recordingsimply we have CTS 3010 and CTS 500 connected to the same L2 switchif i play back a recorded video using the 3010 all goodHowever if we use the CTS 500 the video quality is not good and the bandwid...
I am implementing a TelePresence soloution for my customer. Can I register an MGCP Gateway with CUCM for audio add in/live desk calls or do I need to use a SIP gateway?
Hello,I'm having some difficulty with dialing conventions in H323 and am hoping to find some assistance.I have a CUBE/Gatekeeper in the DMZ with firewall rules to allow H323 communication w/ the GK. I have internal video endpoints registered to the ...
Hello,thanks for taking a look.....Hookflash for supplimentary services using Application, Service DSAPP is not working...Have 2 problems:1:If I make an outbound call from FXS phone to PSTN I can get secondary dial tone....If I receive call from PST...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |