TelePresence and Video Infrastructure

I have a solution that has several pieces to the video puzzle and now we would like to bring in an MCU to do some video mixing, but we are unsure of what the video will actually look like. We haven't seen a demo of how the 3515 visually appears if an...

I need to Integrate a paging system with VG router using ISDN BRI. the manufacture for the paging system told us to use NM-4B-U module in our cisco router and I need to know what is the maximum distance supported between the two devices.

Does anyone know if there is any "documented" proof / compatiblity acknowledgement that 2 models of Axis Communications Video Cameras would work with a WS-C3560-8PV-S. The cameras are:Axis Q6032Axis P344VEAny help would be most appreciated with my c...

Dears.I have a Cisco 2811 with Cisco Unifed Communicator.In my laptop i have just installed a Cisco IP Communicator software to communicate with other people with Cisco IP PHONEI havent got a CUVA CAMERA and i want to use my integrated webcam laptop....

I am have 2X E1s one going to the PSTN and the other connecting to a Nortel PBX. Each E1 is in a serperate wic slot so different types of clocking can be applied.I have to ensure that E1 connecting to PSTN passes the clocking to 2nd E1 connecting t...

hi all,There is implementation of Gatekeeper in distributed (CME only) model for CAC. Is it possible to define in the gateway to allow certain number of incoming/outgoing call (if gatekeeper is not implemented).RegardsNaresh

I have a customer who would like to allow users to put the codec in loopback mode so they can view their own image on the camera before joining calls. Does anyone know of a way to do this? Could this be a new softkey in a future release?

I was experimenting h323 gw to UCM 7.1.2 call setup today and found something that I couldn't understand. let's say that there are 3 UCM servers and 1 CCM group configured with only CCM 1 & 2 servers. 1 IP Phone (7965) is registered to CCM group whic...

Is possible to turn down a dial-peer voice using but dont using the command shutdown.?

Unable to import the Cisco Unity subscribers from Microsoft Exchange 2003 in the Cisco Unity 5.x, and the "An unrecognized error 0x80070005 has occurred: E_ACCESSDENIED, The new subscriber was not successfully added" error message appears

Can anyone point me towards an affordable MCU (preferably software based) that is compatible with MPE? We essentially just need continuous presence functionality. I don't see a serious need for transcoding, etc.Any MCU I've looked at (ie: IPVC-3515-M...

Hi,We are trying to integrate Microsoft OCS 2007 with UCM 7.0(1) using SIP trunk. OCS does not have any PSTN gateways and everything from OCS is sent to UCM (except PC calls from one OCS client to another). The goals are:1. Single Number Reach betwee...

Hi,all.I have a Cisco VT camera II,and my computer's OS is vista. I want to know whether is there any driver for vista or not? If there is, where can I get it?Thanks.