TelePresence and Video Infrastructure

I am running CMM 2.7 and CMS 2.9. All was working well and then suddenly I received a message in CMM stating the CMS cluster is out of compliance. I do not own any PMP licenses (I own several SMPs)  but the CMM is stating 1 PMP is required?Why would ...

Has anyone experience an issue with iPhone running iOs 13.X having very pixelated video quality on Cisco Meeting server webRTC ? The browser is Safari. All other devices such as android, windows have good video quality except the iPhone (in this case...

Hello everybody, Can anybody tell me the meaning of cold and hot in the electric scheme of the Mic of the SX20 mini jack, 4-conductor? And if my scheme below is correctly configured? Based in this information below: Tip = Hot = Channel Left Rin...

HeyI have 2 VCS in clusterWhen I look at status>Calls>calls i see the Start time is UTC time zone and not the time zone I configured in NTP section.If a call is 1 minute long It looks like 3 hours and 1 minute 

I am using python (module xml2dict) to send specific configurations to Cisco CE codecs. When the configuration attribute has space in between, I am getting XML syntax error: error parsing attribute name. The CIsco CE SNMP host uses (host 1 address, h...

Hi Guys,   I'm currently implementing SX80 quad cam with CMS. Scenario for conference described below - From HQ, we use SX80 for conference - We have 26 branches using WebRTC How can I achieve below video output using 2 monitors (TV1 and TV2) from SX...

Is it possible to use a Precision 40 camera connected to the Camera Control and a Precision x12 connected to the Ethernet for dual camera usage?

Hello,Does anyone know why I would not be able to receive content on an Expressway-registered endpoint when it calls into a Webex meeting?  Video content goes through just fine, but content just never shows on any of the endpoints here.Thanks.

Hi, we are trying to upload license files to the CMS server via SFTP with admin user. Its not possible. We are getting "Permission denied" . Creating a new admin user shows the same behavior. We are using version CMS 2.0.2 -> "RELEASE_2_0_2016-08-03_...

Dear good morning, I would like you to help me with some procedure or link to update a room kit plus version 9.5 to a more current version, without using any call manager, that is, from your website only. Thanks a lot

Hi Guys, Is there any way to change the default layout for the call manager adhoc conference using Cisco meeting server? CMS 2.8Jabber 12.8CUCM 12.0 I tried readin api guide and other related document, unfortunatly i couldnt find any thing for adhoc ...

Hi All, So i have 2 EX60's which have both failed during software upgrade.I have built the serial cable, but get nothing off either endpoint other than the power lights. I have tried the button push factory reset, but struggling with the Serial conne...