I have an SX80 that is not showing the system name on the display. The name is correct in the 'SystemUnit' setting, the name is correct in the H.323 ID field. We do not use SIP. SIP is turned off. Also in the ;'UnserInterface ContactInfoType" I h...
Forum Posts
Hi, I don't concern about this so much since call quality doesn't affected (just guess though),I'm just curious about this. This happens to all devices from SX10 to Roomkitmini, in application.log, messages like these are often shown: AdaptationResi...
Hi Everyone, I would like to know if there is any resource out there that outlines the feature difference between a webex device and a onprem device. Are they any features missing on a Webex endpoint vs a CUCM endpoint, vise versa
CUCM and VCS are in two different network and are connected via MPLS. We created the SIP Trunk successfully and also able to establish the call. However we are not getting any media. We also raised it with Cisco TAC SR 687417153. We want media to tra...
Hi, We've got a used Cisco Codec SX80 ( TTC6-12 ). The device seems pretty unresponsive when connected to a monitor and also the uplink doesn't get up. On the console port however there is some ouput :(0,0) Tilera Hypervisor, version 4.3.3.184581 (so...
Resolved! Camera rotation on Cisco WebEx room kit
I have not found camera rotation in Cisco WebEx room kit. Only in Cisco WebEx room kit mini. Is it possible to rotate Cisco WebEx room kit device without rotating the image?
ipad cms management app which based on our cms management solution. service@lcsftech.com https://youtu.be/bI-awqzuaTY
Hello,When a user connects to our Meeting via https://join.xyz.com, they will join successfully, if they disconnect or close their browser (in this case chrome) and try to connect again to the meeting, they will not be able to join again, unless they...
I experienced an issue when using the API commands on a Codec Pro vie the serial port: the command:xCommand Phonebook Search PhonebookType: Corporategives this response:*r Result (status=Error): \x0D\x0A*r Result Reason: "Unknown command"\x0D\x0A*r R...
Hi, I have a site that recently installed a Room Kit Plus, the datasheet indicates that it comes with integrated microphone, but the it doesn't work. Is there a configuration that needs to be done? Regards
From polycom room Hi all, Having issues with some of our endpoints between Polycom group series and Cisco SX20/C60/C40.Connected point to point with Polycom Group 500 and Cisco SX20. From a Cisco Room, we are able to view both cameras (near and far e...
Resolved! (CE9.3) UnSet the button on touchpad
Dear all,I'm trying to Unset the button to show on the group button, for example:2 groups: left, right.in each group I have: 5 buttonBut it does not work, can someone help me? Thank you. function setbutton(event){ xapi.command('UserInterface Extensio...
Fix:Log in to the codec.(you need the IP address, username / password) Go to:Setup > Configuration > Peripherals > (in the “Profile” area, set “Cameras” to 0.Press “Save” on the top right of the screen.Message went away.
Hi, I'm trying to install TMSPE 14.0 on TMS15.9, on a Windows 2016 server. TMS is all installed and working fine, however, when I try and install TMSPE, it fails saying I need Windows 2012 or later. Has anyone come across this before? ThanksGlyn
Is there a way to disable sending video while in a live call/session with the SX10? nothing obvious appears in the TP control tablet or remote controls.Thanks!
