I am trying to register DX80 to VCS-Expressway , i received this below error in vcs-E ,,, 8061102 is allowed in allow list. On dx80 -C.E 9.3.1 ,,i select VCS and provide domain name as mmm.com ,, hostname. vcse.mmm.com , username:8061102 ,,,no p...
I am trying to register DX80 to VCS-Expressway , i received this below error in vcs-E ,,, 8061102 is allowed in allow list. On dx80 -C.E 9.3.1 ,,i select VCS and provide domain name as mmm.com ,, hostname. vcse.mmm.com , username:8061102 ,,,no p...
Does this device support a multisite license to allow it to do the following:Be on a CMS conference and while on the conference dial out to an audio source though CUCM.I have this working for other endpoints but I have read on the documentation for t...
we have one SX20. expressway core and edge has setup. outgoing call has established.But incoming call not happening. can somebody give an example for core and edge configuration setup for incoming call. whatever i did its not working.DNS SRV record c...
Hi, I have a requirement to LDAP integrate Cisco Meeting Server to enable spaces for all users within an organisation, all spaces will require a host and guest PIN for security purposes though. I understand that in order to create the Host and Gu...
Hi All, Wondering if anyone else has experienced a delay with the Webex Share devices, when sharing a presentation in a Webex meeting? Local sharing (not in a meeting) seems to work fine - only when in a meeting do we encounter an issue. Please note ...
My company is setting up Cisco Meeting server in a 3 server redundant configuation with expressway as the edge. Each server will run callbridge webbridge webadmin and xmpp with xmpp, callbridge and webridge being clustered. Only the second server is ...
Hi all, I was curious if anyone happened to have any recent Visio stencils with things like the DX80, Webex Boards, Room Kits, etc.? The most recent one I found on Cisco has things like the EX90 and MX300, but nothing more recent. Thanks all,Matt
Hello, I was able to create a few macros for endpoints that can support the macros naively with some of the code in previous posts, however I would like to get my SX10 using similar macros such as quick dial..etc. I understand this can be dove via ...
Hi, I know there are a number of older forum posts about this but was wandering if anything had changed in the last few years? I'm unable to get the CEC to work on a LG TV, works fine with a Samsung - is there any workaround for this or settings I ca...
We have 2 sx-10`s right now they are registered to CUCM with tms we now have webex cloud and im trying to move them out to webex i have no option to enter the key code from webex to add the device i have no option or menu to input or can the code to ...
Is there any documentation out there that can help me understand codec log files? I would like to know what all these files mean.
Hello all, My company has been purchasing remote monitoring licenses for all units, but how/where do I get the license key to apply? I can provide serial numbers, MSO numbers or anything else needed to track using a recently purchased unit - Room K...
Hello, We recently upgraded several SX Series CODECs from the TC version of software to the CE version of software and now have some issues attempting to connect to far-end video bridge (specifically Cisco MSE MCUs).I only state more specifically the...
HI Team, We have a strange issue with Cisco Codec C20, that seems to have happened following an upgrade to software release TC7.3.15.a9f4c3a The On Screen Display is showing the wrong date & time, however we have NTP configured and synced. From comm...
I'm working with a TCS gen 2 server in my lab. I've set up everything that I know how to do. H323 and E.164 are able to register with my gatekeeper. When I attempt to dial in TCS into my call bridge, I get BUSY as the error. In the TCS logs, I get un...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |