Hi all,I want to register the sx 20 to the ccm 12.5. I used this manual but I'm getting some errors. Any idea about these errors?
Forum Posts
My client has a few EX end points that at the same time all have an issue with the end point communication with the touch panel. The message on the EX60/90 says "Lost Connection with the Control Device" Also the touch panel is not illuminated or work...
HI, There is a problem with SIP over TLS on SX10 and SX20. With SIP over TLS connection breaks after 30 seconds. I have read that this is problem because traffic goes over ASA with version 9.1.5 , and maybe its problem connection tracking with TLS...
Resolved! QuadCam Speaker
Are the speakers in the Quadcam sufficiently powerful for a 'classroom mode' setup with a codec pro in a room about 20' x 25'? I'm trying to determine if additional sound reinforcement will be required.
Resolved! Cisco Telepresence equipments
Hi everyone, Which will be the differences beteween multisite and multipoint? Both need to be lincensed? Both allows to make a call between 3 telepresence devices? Thanks in advanced.
Hello friends, Can anybody clear for me , whether CUCM 12.0 support Cisco TelePresence Codec C60 ( end of life )? I even tried with 11.0 version with no luck Thanks in advance
Hi Given that existing Expressway-E has; LAN1=Public IP Address (No NAT) LAN2=Private IP address (No NAT) Can the cluster be created between peers using LAN2? Or does the cluster HAVE to be created using LAN1? (Thankfully, there is no NAT'ing to com...
Resolved! SX20 install question
Dose sx20 supports POE? Can it be connected via Wifi or needs to be connected directly via ethernet?
It doesn't look like this has been answered so I'm going to post too in hopes someone knows.. Our dbcluster client certs are up for renewal. I've gone through the process to get newer certs (used the same private key etc) but am wondering what the s...
we are registering Cisco CTS3200 series video endpoints into a new CUCM Cluster at my customer site. So need to install TSPM-1.10.0-P1-1S.jad and TSPM-1.10.0-P1-1S.jar file in new CUCM TFTP. Please help to download the same software's.
we configure IP on the Sx80 and setup API configuration. We can get webGui to IP. after rebooting the "Touch 10" device, I can't get into Web interface. I able to ping the web interface IP. Please advice for any help
We try to dial in several Polycom devices via H323 and these are rejected by the Expresswa-E. In the logs I see that the Polycom devices are rejected by the CPL.How can I create a rule for the CPL that allows H323 calls to the Expressway-E or what ru...
I Try to connect the UI acts as if its going to connect then fail
Hello I would like to update a Cisco SX80 software TC7.3.4 to CE8.3.6 but I have installed the option keys: Multisite, Encryption and Premium resolution. ¿Can I update directly without backup this option keys?¿There is a problem updating from cryp...
Recently, we integrated CUCM with our billing system and started enforcing FAC on CUCM for long distance and International calls. Before we routed the calls to our legacy PBX and it would prompt for a FAC. Now that CUCM is asking for a FAC, the Telep...
