Hi, I have a TCS server that's due for replacement. Looking to replace it with CMS Recorder. Can CMS Recorder be deployed stand-alone, or musty it be in conjunction with a CMS Call Bridge service? VC calls are scheduled via TMS, and the TCS server ad...
Hi all, i open this discussion to ask some questions about protecting Exp-E from undesired inbound calls. I have Cisco Exp-E configured with search rules to route incoming calls from Internet to reach the internal dial-plan only, search rules are con...
Hi, We are trying to provide SX10 demo for point to point call on MPLS which is failing looking for support what all ports should be opened and what configuration should be done . Hope for positive reply at the earliest.
Hello, I'm trying to see if there is a way to send different sources using the SX80 camera input. I have my input sources going into a video switcher, and need to output those sources selected sources "Program" through the Camera Input on the codec. ...
Hello Community,In the past, I have used a single Cisco HD Camera connected to an Extron Switch and then outputted the cam video to several Cisco codecs depending on which one is in use.Have a customer that like and want to use the SpeakerTrack 60 an...
Hey Guys,A newbie question : what's the best practice about registering codecs on a VCS :SIP or H323 ?Do you think its good to registering both ?Thanks for you replies
Hello, We are in the midst of our migration from a Codian MCU to CMS 2.4.x. As we began testing, we noticed that CMA and WebRTC doesn't work on the ATT cellular network. We would join a meeting without success. The "no one is sending video" m...
Is there a page or document about all the available Option Keys for Cisco Codecs? I want to learn more about the default installed options if there’s any.. I want to know if the ENCRYPTION Option is default to C SERIES Codecs and SX20s? Is firmware v...
I've a SX80 with CE9.3.3 and Touch connected which replaced a C90 codec. When in a call I can adjust the layout (upper right corner) but the options are limited. I would like to add a layout side-by-side equal view, ie remote party on the left and pr...
I have a large CMS installation with no inbound or forwarding rules but calls still able to land on user spaces. Does somebody knows why? CMS 2.3
Is there a supported monitoring platform for the Cisco Meeting Server (formerly Acano)? SNMP does not provide much detail. Does Acano Manager or any other platform provide greater insight? We are looking for overall system health (CPU, etc.) and lo...
Greetings, I'm curious to know what your thoughts are on Pexip and if anyone has integrated this platform into their environments as a result of interoperability challenges between different video conferencing systems such as Cisco Telepresence and G...
Hello, I'd like to get some confirmation regarding the dual display option in CE. In TC, if I'm not mistaken required the the dual display as an installed option. Is that not the case with CE on an SX20? I did find notes on CE8.3.6 and found the...
Hello, I've got a question. Is there a way to configure the Firewall rules on the Expressway via CLI (Show, add, change, remove) I can't find anything under XConfiguration oder XCommand. Kind regards Nico
I have a Telepresence IX5000 unit that is missing a few items to complete:800-42131-xx (Trim Under Monitors 3 pieces)74-13021-xx (Front Bottom Main Covers 3 pieces)74-12905-xx (Front Top Main Covers 3 pieces)800-41842-xx (Vertical Bezels between Moni...
