EX 60 & 90 - Guys would you please assist here, is it possible to change the Cisco EX 60 OR EX90 software TC ...to CE...?
Forum Posts
Hello, I would like to migrate VCS C and E from appliance to VM. And I want to keep exactly the same config including ip addresses and Hostname FQDN (No FW, DNS, CUCM config change). I want to keep the same software version and load same license...
Resolved! C40 automated backup
Hello, Is there a way to automate configuration backup on C40 codec, via SSH, or any other way? I tried using plink, but only able to autheticate, not execute commands... Regards, Petar
Hello! We have CUCM 11.5, Cisco MCU 5320 and Codecs SX10, SX20,SX80. We can not encrypt calls. We installed certificates and added phone security profile on Codecs. Also we enabled TLS on MCU and on SIP trunk to MCU. What is the problem? Please, help...
I've been looking at the Cisco Meeting Server 2000 which is now in CCW under CTI-CMS-2K-BUN-K9 and have some questions about this. Is there more technical info on how this setup works?There are 2 disks shipped for 8 servers, how will the CMS instance...
We just got our first Spark room 55 unit (on wheels) and installed the unit yesterday by myself (took about 3 hours mostly fixing wiring lengths in cable snakes). Aesthetically, the unit looks very nice. Height is taller and a more traditional heig...
I have searched the web and timeout issues with video conferencing seems to be common. The workaround that is most commonly suggested is to increase timeout values on firewalls etc. In our case we see that an H323 connection is opened on the default...
Resolved! Licence Dual display c40
Hi, can we still order the dual monitor licence for C series endpoint ? thank you for your help regards Diogo
Resolved! MX series self-provisionning
Hi all, I'm about to setup a MX700 telepresence endpoint with no provisionning system... meanning that all setup have to be done mannually and locally so here is my question: What do I need to make my MX700 to be called by external visionconferenc...
Resolved! C20 can not be loaded
Hi Guys, i have C20 with TC5.1.4.295090 and after registered with CUCM 10.5 and make local calls, suddenly the codec not working and green LED always flashes and didn't see any thing on the screen! what could be the issue? thanks Mohammad
Hello, Can we use the CMS 1000 as the Conferencing Server for the new Spark Room Series Endpoints like; Spark Room Kit, & Kit plus or Spark Room 55 / 70 inch. I read it can register to CUCM for On-Premises Deployment. But What about the Conferenc...
Hi! I am currently trying to find the reason in the Release / Manuals / Bug search / forums. Endpoint TC7-1 is calling TC7-2, SIP TLS all the way through. We noticed an issue when using a combination of X7 and X8 VCS that on an endpoint call termi...
placeholder
The CMS 2.2 release notes outline support for dual screen video as a replacement for Multistream for Telepresence Server. The old version of Multistream required CUCM 10.5 or 11.0 (depending on the version of endpoint software), but I can't see any ...
Hi Guys, Anybody have implemented Wowza with Cisco CMS ? Any document on Wowza and CMS integration ? Thanks Manish
