I connect my DX80 to my Lenovo laptop using the HDMI cable to use it as an extended monitor. Audio is fine when at first until I make a couple of calls through my DX80. Then my laptop audio gets disabled. I don't get any sound playing any audio/video...
Forum Posts
Is it possible to setup B2B calling through an expressway C and E without setting up MRA? Obviously the traversal zone can be setup, but I don't think you get the option to add a local domain until MRA is enabled. Basically they want B2B calling no...
Resolved! Cisco Telepresence 3241 ISDN Gateway.
Hi, I am new to Telepresence. We have Codian MCU, TMS, VCS-C&E. We are doing a migration and their tech lead is requesting to remove ISDN gateway. My Client wants to get rid of 3241 ISDN gateway and asking to use CUCM. I am not sure what we should ...
Hi AllHaving an issue with the syslog server setup in a clustered Conductor setup. Running Version 2.3 When I remove the syslog server address from the master, it stops sending logs to the syslog server. (as expected)(maintenance -> logging)When I re...
i have new device,how can i access for it.
Dears, We have a customer asking for ISDN Video, my old option was to use Cisco 8321 OR 3421 but this option is EOL, my concurn can we do Video recording with Cisco ISDN Link ?! Regards,Ahmad Kefaya
Good afternoon,I have 2 SX20 units which I am not able to access either by web or by ssh. These units were changed from DHCP to Static, and are registered in CUCM and fully functioning. Any thoughts on why this happened and is there anything I can ...
Resolved! TMS Active Meeting Manager AMM?
I've installed TMS 15.1 & TMSPE 1.6 on Win 2012 server. All pre-requisited are fulfilled but the Active Meeting Manager AMM is not displayed in the Smart Scheduler interface. I do not see group settings to allow access to the AMM. Something I forgot ...
Hi,Kind of frustrated.Wondering what conditions need be present to require the MultiSite License? The documentation I've looked over at length doesn't specify unfortunately. I read a few NON Cisco definitions that state MultiPOINT as 3 or more parti...
Resolved! How do I delete a Space in Cisco Spark?
I logged in to Cisco Spark.Clicked People icon on the left.Clicked into a TeamChose SpacesClicked + New SpaceGave new space a nameNew space appeared unter Teams / Test Team / SpecialProjectsSpace Now I want to remove SpecialProjectsSpace but cannot.I...
Hi All, We would like to ask if how can we determine the reason why the SX 20 went unregistered? Upon checking, we found out that SIP URI became blank/got empty and it casuse the SX20 to unregistered from the CUCM. What logs can we check to see if th...
Hello, Please let me know is there any exam relates this training? ThanksSuchi
TMS installation guide have the following descriptions. https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-15-5.pdfP8 <100 concurrent participants What is TMS's "concurrent participants" co...
Here is the log. Trying to register my MX300 but fails.May 10 15:07:48 ppc main: SipSubscriber(): SipServer 0 is on auto detect May 10 15:07:48 ppc main: SipSubscriber(): SipServer 0 is on auto detect May 10 15:07:59 ppc appl: 14322.78 SipStack I: N...
Resolved! VCS C/E migration to VM
Hi I've a query regarding the IP address assignment for the Virtual VCS-C/E. When ordering a virtual server, is it necessary to have dedicated subnet range for the VM VCS C/E or is it fine to use the shared IP subnets (All other application VM's wil...
