I have Several DX80s registered to CUCM 11.5. When they connect to CUCM they register with the phoneext@internaldomain.org. The device is connected to the users profile and can be dialed via their normal SIP address (their email). However, TMS list t...
Space configuration URI user part created space does not add @domain.com to the spaces created from LDAP import. CMA apps to does no add domain.com to the video address as well if i create a space manually. I have checked everywhere but maybe i have...
Hi
i deployed cisco expressway with architecture Mobile and remote access ==> all function good
i have just added new subscriber but still not displayed on unified cm server list on expressway-c even i restarted expressway-c and also i restarted the...
Hi to All,
We are planning to upgrade our Cisco TMS v.14 with Cisco TMS v.15.4 and locate databases on MS SQL 2016. Please advice if TMS v15.4 and TMSPE 1.9 were tested and compatible with SQL 2016?
Many Thanks in advance,
Nick
Hello friends,
1) I registered CTS TP to CUCM with TLS and looked like Ok (Lsc, Ctl files have been downloaded to the devices).
However when I made a call it fails as error: "remote site is not compatible".
the config is below
2) I want to register...
I am writing to ask if the Cisco Touch10 is vulnerable to exploit. As I port scan a few of my company's Touch10's (three of them anyway, each paired with an SX10), they all report that they are listening on TCP port 49152. I presume this is how the...
We have enabled H323 Protocol on Expressway and are concern about security of encrypting the same over TLS of using h235.
Does Expressway supports the same? Any Thoughts
Hi,
I updated the web bridge URI from join.company.com to join.vc.company.com the log is reporting 'web bridge link 2: name resolution for "join.company.com.au" failed'
Users can still get in via WebRTC
The CMS Web config has all the URI updated...
Hi all,
I need to configure a direkt h.323 call to an Lifsize Room.
With that guide I was able to call IPs with Jabber or MX Devices:
http://www.cisco.com/c/en/us/support/docs/unified-communications/telepresence-video-communication-server-vcs/118884-...
Hello,
I noticed a weird issue with REM's video. When we use standard H264 codec, there are lot's of output queue drops on access switches, to wchich a jabber client is connected. The number of drops is enormous, and the video quality is very poor. S...
our customer wants know the SSH version of VCS..
because the openssh version has a weakness of security on their VCS (VCS version is 5.9)
Who is know the SSH Version of lately VCS ?
The main unit will not power on.This one is in a remote location without other supplies to try.From the good ones I have, there is solid blue no matter if the main unit is on or off.Anybody know what flashing blue means ?
