Hi,
We have a latest version of firmware. Is it the compatibility why DVI connection not working?
If we use HDMI its working. Please do help.
We running out of time as it is an broadcasting company.
We need to work this within the day.
For your as...
Hello,
A customer has plenty of 9971 series and other video capable ip phones registered to CUCM that are obviously not TC endpoints.
How do I go about adding them to TMS ? Are they added only as unmanaged endpoints ?
Is there any way that I can f...
Hello,
Can I use the same pair of expressways (exp-e and exp-c) for both business-to-business and mobile remote access ?
Or do I need to use one pair for B2B and another for MRA ?
Any caveats ?
Regards,
Christos
Dears,
as i found that DX 80 can search using UDS
i already test the search and there is no issue
what if i need to add Contacts From CUCM or From Active Directory
to let customer check the cooperate contacts !
I already know that i can use the Outl...
Could you please help me to find the compatibility for TMS Version:13.2.2 with Windows server 2012 R2.
The existing server is Windows 2008 R2 Entreprise and business wants to upgrade only the windows server not TMS.
SQL version is 2008 and SQL Manage...
Hello all,
We have a solution with TMS (14.6.2), Conductor (XC3.0.3) and TPS (4.1(2.33)).
Since we upgraded TMS to 14.6.2 (from 14.2.1) we are getting this error:
We get this error when we have another schedule and both get over 12 participants. We...
Hello,
Hoping someone can help with this. I have a business to business video call having some issues. The other end is using a Life Size LFZ-023 codec. When they call us, an SX10, the call rings and drops. The call works when they disable security o...
Hello,
We recently installed several SX20's and SX10's at our site and have issues with content sharing, when we try to start the presentation while connected, it flickers, quality goes down but we still see the camera from the far site instead of th...
Firewall in between two different networks. Traffic goes through our VCS Expresswy. and Packet capture did not indicate video or being denied. Network bypassed the tipping point to be sure. Connections are always successful and the drop audio and vid...
Guys ,
can we make conference templates based on location ?
like we configure Device pools for a particular site ?
customer has two sites with less bandwidth available for video calls ,how can they actually prevent choking their traffic for video...
I am running F9.3.4 on most of my MXP's but have a question about the passwords.
On TMS to manage passwords for MXP endpoint:
Is the SystemUnit Password label on TMS the same as IP Administrator Password or the IP Access Password ???
Is the OSD Menu...
We have a SIP TRUNK between our CM running 8.6.1 and our VCS running X8.5.1. Was working earlier and then we made a change in error.
In the SIP trunk section of the CM where the IP or SRV record to the VCS was changed from IP to a bad SRV record kil...
Hi TelePresence Experts,
When I connect my laptop with sx20 and click on 'call control tab' a message shows in the two displays of the laptop. The message is "Snapshots require the RemoteMonitoring option key". Would you clarify me the reason and th...
