How does the video infrastructure looks like and what are all the products or components required for the new company video Cisco infrastructure. As a beginner I would like to know the infra setup with some detailed explanation.
I recently purchased a abandoned surveillance company in Santa Ana CA and I got Six CTS-DISP-65-GEN3 Monitors and alot of components that go to these. I know nothing about cisco. Does anyone know where I can find a buyer for these in San Diego CA? I...
March 15th a new DoS vulnerability in OpenSSL was published.Is there any documentation available on how quick Cisco tries to respond to these matters?OpenSSL is used in quite a lot of Cisco products, one would assume they would be first in line to mo...
Does anyone know if there are any settings for the Subwoofer line out on the Quad Camera? Or does it just use the main audio settings? Can the volume for example be adjusted on this line differently from the audio out on the codec?
You are trying to use xAPI (/v1/xapi/command/{commandName}) among webex teams apis.When testing the API on the 'https://developer.webex.com/docs/api/v1/xapi/execute-command' site, the API works as expected.When testing with postman, it is forwarded t...
Hi, Has any tried to downgrade expressway edge from v14 to v12?If so, how did you do it and any license needed? I'm seeing from this release note that downgrade is not supported. Want to check if my understanding is correct? We do not support downg...
We installed Webex Room Panorama at our customer. After installation, I made a Webex Meeting Call and the layout was strange.During a Webex Meeting Call, the other party's screen appeared only on the 1st monitor screen, and the document sharing scree...
Hi all, I'm currently in the process of writing a macro for our webex room systems that gives the option while in a call to select/change/move the far end camera sources for endpoints that have multiple cameras. We have a specific requirement for som...
I ran into an issue where two of our C20's would not connect and could not be reached. These devices are down stream from a Meraki which was connected and remote capabilities to it were operational. The C20 had the appropriate IP, subnet, and GW. The...
Hi AllI am having real issues blocking inbound calls coming from 1000@ on my expressway E.I have put in lots of rules from 1000@.* to anywhere, but it does not work. It even says call rejected on the logs but yet when I test my phone still rings.Why ...
Hello Everyone,I set up cmm 3.4 and cms 3.4.1 in my lab. I created two roles in cmm as follows:Host role. I enabled activator for this role as well as conference lock. Guest role . I disabled the activator and other features.i...
I have a Codec Pro with Quad Camera. I keep losing the incoming audio signal from external endpoints via the HDMI ARC and would like to try using a line out (1-4) Euroblock to line in audio on the Quad Camera. What type of connection input is the aud...
With a number of SX80 codec's I noticed that they go in to maintenance mode, after a power reboot or a software update like in my case going from CE 9_15_0_13 to CE 9_15_3_26, and also tried CE 9_15_10_8Most of the times A factory reset will fix the ...
All,Is there anyway to disable maintenance mode? I have a very large customer that is having a lot of problems with their TC6.1.2 codecs going into maintenance mode for the silliest things. Over the weekend, one of their codecs lost power briefly; ...
With Manual zoom-in, we're not able to achieve the complete zoom as we get on Speaker track on CISCO WebEx CODEC Plus with Quad Camera. Device is on Firmware ce 9.15.3.26 19885f27907 2022-01-30. Is this a bug or Am i missing any Settings change ?
