Hi..We have Cisco MCU 5320 integrated with CUCM Version 10.x and we are able to make calls from CUCM registered endpoints ( SX20 )to MCU using the meeting ID in addition to this we are also using VCS-Control and have Polycom endpoints registered on ...
Hi, I am following cisco install and upgrade guide for TMS . The problem i am having is that when i click restore i get the following error. which i have no idea where its coming from . Basically i have moved TMS 14.6 on a new server different ip ad...
Hi , just installed a brand new SX20 12 X Zoom, configured it and placed a couple off calls to test it - everything was perfect.We went home for the night and this mornin the led on codec blinks - and camera seems dead, no lights. i cannot rech the c...
Hi There I have searched high and low for an answer on this including our own configuration but i just cant find the answer so I hope someone can help. I have a client who has upgraded his MCU from an 8510 to an 8710. Before the upgrade, when the con...
We are having a problem with the Tandberg MXP6000's dropping calls every couple of minutes. The problem only exists between the two campuses that are connected via a DS3 link. Campus 2 has to travel the DS3 circuit up through Campus 1 to get out to t...
I have an issue with a few SX80 have been installed and they drop calls only when it's an audio call and only sometimes. In the past I would have scheduled a few calls after hours and simply capture them all using a syslog over an SSH session to the ...
Hello,I have one SX20 with a internal IP Address and a public ip configured with NAT, when i call a external video the other user see my internal IP.How can i show only my public IP.RegardsLeonardo Santana
I'm trying to add the VCS Expressway to TMS. When I add, TMS attempts connecting through the various protocols. Then, it errors and the screen refreshes pretty quickly, and I can't see what happened.Where do I go to look to determine what happened?...
Hi,Let's assume that I've got an SX80 codec with PrecisionHD 1080p4x S2. The camera has a custom video/control connector but can be used with SX80 codec via the HDMI/RJ45 adapter. The camera is connected to the D-SUB 9 port on the codec and I know th...
All,If I have 2 x SX20 endpoints registered in the same UCM cluster and accessible via the internal network with no firewall traversal, do I need any additional license (They both have room licenses) to establish a point to point video call?The licen...
Hi All,TMS 14.3.2 (although the issue has been around on different versions)We have been having a slight issue for ages with TMS where it is issuing email warnings about a failure to update a Phone Book Source based on a Gatekeeper (mainly VCS, but s...
Hello,What's the operating system for the MSE 8510, 8050, 8321?Is it the same as CTS (SX80, C60, VCS, etc) using Linux operating system? Thanks in Advance, Lan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
