TelePresence and Video Infrastructure

I have a security alarm I can't remove on a CTS-Manager By digging the logs and capture traffic, it seems there is an internal snmp mecanism in the device using / generating bad snmp community namesThere are about 163 bad requests per 5 minutes ... P...

My TelePresence SX20, you receive calls H 323 protocol a number that says so "h323: cisco" this happens during calls with my other equipment telepresence and standbye regards

Just an FYI.I managed to get my PrecisionHD webcam working on my MAC OS 10.8.5.  As in other posts around the Internet it stopped working after a upgrade to the OS.Had to upgrade the firmware on the webcam from a PC with the "cc150.exe" download from...

Hello!I have a CUCM with 2 3rd party SIP devices (Advanced) registered with it. The symptoms are: I can call from 1st device to 2nd and vise versa, but call drops after 15 minutes.Devices are in different regions with Max Audio Bitrate of G.711, Maxi...

 curl -k -u 'admin:cisco'  -d '<Status><SystemUnit><ProductId status="True"></ProductId></SystemUnit></Status>' http://<IP>/putxml I am trying to get the API working to get the System Status  and have the following command. It fails with the error be...

Hi, I have a C60 endpoint setup, the audio In/Out is configured with a Polycom Sound structure C16.I have a pop up message from my web login stating Audio Delay Alert.Is this pop up something common, or it could be because of the network latency...Th...

hello,We have a CUCM 9.1 cluster and the Publisher has peaks of CPU of about 97%, I have checked and most of this is caused by the Lpmtool process (auditd was another villain but I disabled it easily); it takes up to 65% of CPU utilization sometimes ...

In the current Touch 8 & 10 you can select the preferred language.Some countries such as France use AZERTY keyboard but when adjusting the language the keyboard remains in QWERTY.Is there a way to change this or is this a feature that will be availab...

I Have a Cisco SX80 and would like to find out if Cisco SX80 Supports  3 seperate Dissplay modes. I.E.I have my main screen showing both incoming and outgoing video signals.I need to be able to have the incoming signal project on an external monitor(...

i am looking for a ip camera ( with mic & loudspeaker )  , please suggest model for NVR to support 25 camera

Hello,We are integrating our product with various Cisco VTC codecs using each of the codecs RS232 serial interface. Does Cisco have a simulator or test bench that our solution can be tested against? I would like to validate that our control will work...

Using TMS 14.2.2 --- mix of MXP and C-Series (20/40/60/90) and SX20 endpoints.... is there an easy way to determine which of my roughly 200 VC systems support Dual Display?  System Overview doesn't seem to contain the Dual Display info.I could log in...

Hi,To provide relevant statistics on VC's, I am looking for a link between the objSystemCallLog record and the E164 Alias from the MCU MSE-8500.The data is available in the field StrValue from the field_SystemField Table, this StrValue field is linke...