I need to have the Sx20 connected to CUCM via SIP do make regular calls but I also need it to connect to old vtc that only do H.323. Has anyone done this?
Hi all, I am trying to use the system task $restart recently and hit some questions. My application communicates with other process by socket which is implemented by PLI. The question is that after I invoke $restart() on verilog side, the sock...
Hi i'm using MCU5320.i'm curious if it is possible that MCU adds participants as Jabber 10.6 users and DX80 in a conference room.I've tried to add 3 mx300 from MCU5320. How about DX80 and Jabber 10.6 users? Thank you for reading.
Hi all,I'm trying to add new Device Phone in call manager 8.6However, I can't find the Edge 95 MXP phone type.Do I have to upload any firmware or choose other similar phone type??Thanks Sam
Hi, Would anyone have or know if Cisco has a guide to convert a VCS Control to a VCS Expressway? I have the license keys, but wanted to make sure the steps are correct since its an important piece of infrastructure. Is it a simple process as just ent...
Hello,I have a number of Cisco SX20 and C40 with dualscreen option. When in conference or on a call I'd like to have maximized selfview on the left screen with remote stream in PIP and maximized presentation on the right screen.Now I only can have ma...
Hi everybody,we have implemented the SRV Records,_sip._tcp.domain.com_sip._udp.domain.com_sips._tcp.domain.comAnd these entrys are working fine.But after a long testing I can see that there is a needed NAPTR at domain.com,and because of this the dns ...
How can or is it yet possible to have 323/sip endpoints (C series, EX etc) join a WebEx (SaaS) meeting online. If not (and I am guessing it is not possible) what is needed to do it on prem? CUCM, VCS and a WebEx server etc etc?? Thanks Rich
We are planning for a Conferencing solution with 6 conference rooms. The conference rooms have SX80 or SX20 units. 50+ users should be able to join using 8800 IP Video phones as needed. The customer already has a BE6K UC infrastructure with CUWL lice...
Hi all,I'm trying to add a TCS to a TMS as a recording device but it ends up with an error "Wrong username or password".Both of TCS and TMS belong to a same AD (test.local), so I tried "domain/username" and "password", "username@domain" and "password...
Hi, Our customer is having 9 units of 95MXP with ISDN Gateway 3241 and MCU4501. Using built in gatekeeper from ISDN GW. To deploy DX endpoints, we will be purchasing a CUCM. Are we able to register MXP endpoints, ISDN gateway and MCU directly with CU...
Hi All,What do people on here use to monitor their VCS's (or Expressways)? Specifically, I would like to be able to monitor and be alerted on the status of a Traversal Zone.TMS is be no means a Monitoring solution - at this it is completely pants (at...
Hi.Just a simple question regarding default audio codec on SX80 (TC7.3) H.323 calls. Is it somehow possible to swap G.711 codec type from ulaw to alaw? Thank you.Marcel
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
