Hello Client, has sent us the following video stating the following: "There has been a beeping in the board room. The sound is coming from the ceiling speaker. Attached is a brief video. Any ideas?" Any help tracking down this issue would be helpf...
Forum Posts
Hi, I have Cisco Webex Room Kit Mini and experiencing some issue in voice clarity . i am using HDMI for display and USB for voice and camera from my computer.issue: all off sudden voice drop from other participant in the call and also makes some soun...
Do anyone have the pinout for the rj45 to minijack and phoneic to rj45 adapter. Named H and I in the Ceiling microphone installation guide
We are using interworking on expressway to provide H323 endpoint to call a SIP device. The problem we have is that the SIP device does not support delayed offer. We are looking at the custom setting "Send empty INVITE for interworked calls" as a meth...
Calling Room Kit xapi from an external PC, the device returns the following error message: xapi.RateLimitError: ('You have exceeded the codec connection rate limit.', 503).How do I configure connection rate limiting? thanks!
Hi everyoneI am one of the trainers co-facilitating a training group and have been in a couple of webex training groups so far, but the most recent group has had a specific tech issue I haven't been able to get my head around.Everyone in the group ha...
Hi All I Need some help actually we have conference call on and in this called have joined participant from 10 VC device and 10 through Laptop i want to highlight only 1 VC device Video on my moniter and i am join in call using SX20 device and ...
I have a large space that needs to handle a circular set up or an oval table but much larger. The oval would be about 35' across on it's widest spot maybe 25' on the short side. Setting up in a large conference space for about 25 participants in pers...
Hello I have a Tandberg TTC8 -02 camera that I would like to use as a stand alone camera using the HDMI as output.. What I would like to know is if I can use a USB console cable connected to the codec port on the camera to connect to a laptop for PTZ...
Resolved! Factory Reset Cisco SparkBoard
Hi Guys, I wanted to do a factory reset on my Cisco Spark Board 70, since the admin has resigned for quite some time and no one remembers. I did some googling into the topic and pretty much got how to do it. But, it got me left with a few more questi...
Hello Dears In order of the literature, it says that the names of the phone security profiles in the Unified CM that are configured for encrypted TLS and are used for devices requiring remote access. Use FQDN format and separate multiple entries wi...
Hello dears,I would like to know if someone has configured how the Expressway retrieves authorization credentials (username) from a client browser'certificate, without standard log in mechanism.The documentation explains the process configuring the R...
3 cameras connected to cisco codec pro. the client wants to send as a single video after combining them together. how can I achieve this? Codec software version : ce 9.9.0 46f7ea38fda 2019-10-10 I found that new firmware has been released as ROOMOS. ...
I have this issue: Even that Cisco and QSC brought a Plug in to communicate between each other, my client doesn't want the QSC on their network. My lack of experience push me to ask:- What kind of protocol goes out RS232 on Cisco Codec Pro? Will I ...
Hi Everyone Who has E20 firmware s52100te4_1_7.pkgThank you very much!Thank you very much!Thank you very much!
