TelePresence and Video Infrastructure

3 cameras connected to cisco codec pro. the client wants to send as a single video after combining them together. how can I achieve this? Codec software version : ce 9.9.0 46f7ea38fda 2019-10-10 I found that new firmware has been released as ROOMOS. ...

I have this issue:  Even that Cisco and QSC brought a Plug in to communicate between each other, my client doesn't want the QSC on their network.  My lack of experience push me to ask:- What kind of protocol goes out RS232 on Cisco Codec Pro? Will I ...

Hi Everyone Who has E20 firmware s52100te4_1_7.pkgThank you very much!Thank you very much!Thank you very much!

Hi Cisco expertsI'm looking for a solution to control 4x P60 cams on a codec pro. Just from the Admin Instructions the maximum is 3x cams. 2x bei HDMI and 1x by SDI. My request is to control 4x cams. Is there and option maybe to connect another codec...

I inherited a Cisco Telepresence setup which came with two standard microphones. I would like to add extra mics to cover the whole lab room. Is this possible? If yes, what do I need to procure?

Hi,We need to upgrade the OS of our SX80 codecs to the latest level , so they can be used with CVI (to use them also with MS Teams).Some of them have still an old OS , will it break the integration with our AMX DVX2155 system if the firmware is upgra...

Good Morning,we are having some troubles while using CMA since if we connect to a videoconference room without any camera connected to our devices, microphone doesn't work properly and starts a loop - it disconnects and connects repeatedly. The "Join...

Hi, we have a Precision Room Kit Plus 60 in a conference room and they aren't able to hear sound coming INTO the room from outside parties, but the outside parties can hear them.  We tried restarting the system, restarted the Touch10, the TV, confirm...

Currently, I have a primary Cisco MCU 5320 and a slaved 5320 that are not accepting my username and password. The sign on was working a couple of months ago. How do I recover to get access to my MCUs. Thank you. Hector Mejia

Expressway Version X12.5.1I have an Expressway - E in my setup using it for MRAI have got an error as mentioned in title. " Next Restart will trigger the factory reset". Please note that we were having two nodes in Expressway Cluster in past but now ...

Hello,according to https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingApps/Web-App/Important-information-doc/Important_information_CMS_webapp_3_3.pdf (Page 16) in-call DTMF was possible with the old WebRTC Client but not in WebApp 3.3...

Does Cisco have a good IP to do a VTC IP test call? Like a bridge of some sort.

Hi, We have a tandberg 1700 mxp desktop video conferencing deviceAudio not working no speaker no micI checked speaker and mic in menu but no sound in speaker and mic not working.Could you please help me?

i have an old TTC7-18 Tandberg VC unit, does anyone know how I can use it strictly as a webcam? Or if I can....  Thanks