TelePresence and Video Infrastructure

Hello,Am christopher from TANZANIA (EAST AFRICAN COUNTRY).Please help me.we have our cable tv and we want to stream it to our another office in another region, where we have configured a VPN in this two offices using cisco router RV180. I have tried ...

Tms system warning message:"TelePresence Server pool license usage is approaching or has reached full capacity"This warning message is not true as there is no schedule meeting and not any adhoc meeting.May be i need to consider this warning as a bug....

Hi all,I have an aging telepresence infrastructure of tandberg/cisco units communicating via H.323 and a couple of tandberg gateways. Generally it works ok.I have an issue where calls get disconnected about 4 minutes into a conference, sometimes it i...

Hi All,Hope you can help.We are trying to replace a Tandberg 1000 mxp with an ISDN Link box paired with a c40 codec. The ISDN Link box has been tested and works in our office isdn lines connecting both incoming and outgoing at 384k.The 1000 mxp is co...

Need Ports to be opened on firewall side for Cisco CWMS (Cisco Webex Server 2.0) We are deploying the Cisco CWMS I would like to know the ports which are essential for external and internal communication also on firewall levelplease help if any guie ...

Hello,I have a Tandberg TANDBERG 550 MXP when i call another Video Endpoint there is no video and see this log on 550 MXP Video format unknown.What could be?RegardsLeonardo Santana

Hello, In my PBX  I can use video in cisco jabber (over the lan)When users from branch try to use it does'nt work .In the jabber they get the error "video service is video unavailable" /The media service is installed .Any advice ?  

Dear Team, We have SX20 with s/w 7.2.0 paired with ISDN link s/w 1.1.3 with 3 BRI lines , we are able to call to any Cisco endpoint / Cisco MCU.But calls are not going through to any Polycom endpint or Polycom MCU.Can anyone suggest on this for resol...

Morning all, Just a quick one, I have three SX80's with a PC connected to HDMI input 2 and three on all units I get no audio on the second input. I have checked the configuration settings and audio is selected to on. Has anyone else encountered this ...

Somebody has  a pinout of "Y" cable (CAB-C20-RS232-DBG) to control the codec Cisco C-20 and the camera? We don't have a time to make a cable's order, please help me. many thanks....