TelePresence and Video Infrastructure

Hello,The TMS Software suite have a new option (coming with 13.2) that allow the conference master to extend a conference via endpoint prompt.The conference is started and works fine. The Endpoint got a message that the meeting can be extended by 15 ...

Dears , We are Planing to integrate CISCO Video Conferencing Network with the CISCO web-ex , Please advice below server will support for the Integration /we haveCisco MCU - Cisco TelePresence MCU 4501CISCO VCS - Cisco Telepresence Video Communication...

Dear all,I try to record video and voice calls on TCS from Cisco IP Phones (video available/unavailable) and Jabber.Topology is;IP Phone -(SIP)-> CUCM - (SIP Trunk) -> VCS Control -> TCSTCS is register with VCS and IP Phone/Jabber register with CUCM....

Hi,May I ask how to factory restore a Cisco Teleprecense CTS-1000?At first I was able to connect to the CTS-1000 through its Web interface.I changed the VLAN in the web interface and after the restart I cannot login to in anymore.Is there anyway to f...

In TMS noticed that the MCU had an error "wrong password/username".  Tried to log on to MCU with the web browser and it indicates that the Admin account is disabled.  I am the admin and have not disabled my account.  Can I make a serial connection an...

I am receiving random calls from a site called CISCO on every public systems I have either it be infrastructure (MCU with VFO or VCS Expressway) or endpoints (Not registered to infrastructure. H.323 ONLY. SIP DISABLED). Can someone let me know how we...

HiI have a VCS-C and VCS-E setup and wish to call an external Polycom VBP that is not using @domain inits gatekeeper registrations.Is there any way to alter/transform only the call payload to E.164 only, but yet retain the full E.164@domainfor call r...

My Company recently purchase a Cisco Tele Presence MX700. I need information on theSpeaker system, I am only getting sound from 2 speakers one each (left side /right-side)The configuration is for 9 speakers 4 on each side plus the one in the middle.a...

Welcome, Is it possible to provisioning the users from AD and local users created in Cisco TMS at the same time?I've synchronised the Cisco VCS/TMS with AD and the users can sign-in on Jabber for Video. The problem is with local users, created on TMS...

Is Intelligent Proximity Available on an  EX 60 running TC7.2.1.cb31c3d?If so how do I enable it?Phil 

Hi All, Need expertise advise on the following concern about voice call. 1. Bandwidth requirement for video call across all other endpoint(using Polycom / Lifesize end point at their end)     a)Standard Video     b)1K HD Video     c)4K HD Video 2. Pl...