do you have the URL for the ROI and TCO tool for Unified communcations
do you have the URL for the ROI and TCO tool for Unified communcations
Can both of these devices have the same domain configured? Thanks,Alex
Video calls from internet using H323 do not work. When I call to (conference room)@domain.com.br do not work. But when I call to (conference room)@(Ip address) the communication works perfectly. What could be happening ?
Dear team, We have CUCM cluster v 10 deployed.Below is the architecture :SIP Trunk Provider ------ Telco CPE <-------SIP ------> CUBE (Cisco 2901) <----------SIP TRUNK <-----------> CUCMCurrently when making a call from or to a PSTN Number, and put t...
TelePresence Community,I have a customer with many TP endpoints (EX90, MX300, C40/60, CTS500, CTS1300, CTS3000/3200, TX1310, TX9000 and TX9200). My network management server is pulling call detail records directly for each endpoint with the exceptio...
Hi, Does anyone have a good comparision between the MX200/300's G1's and G2's? Thanks in advance
HelloI configured a new SX20 and Its registered with CUCM 8.6.2. When i make a vídeo Conference call and i try To add the thirdy member Its not possible?What could i check?RegardsLeonardo SantanaSent from Cisco Technical Support iPhone App
CUCM --- Expressway-Core ---- Expressway-Edge ---- Jabber Voice.Is it possible for the Expressway Collaboration solution (VPN-less Jabber) to connect the CUCM only? without the IM& Presence server? I just wanted to get the phone voice service only.As...
We're looking to purchase a video wall for one of our larger conference rooms. I am just curious how the MCU is going to display on a video wall. I understand that a conference in the MCU is going to be one stream as opposed to separate streams. Howe...
Hi Guys,I have installed ISDN GW 3241 2.2 (1.92) software last week. I went to download it just now and its been removed from the Cisco download site. Is this correct or am I missing something? If it has been removed, why has it been removed and wh...
Hi all, One of our customers has Polycom VSX5000(Ver8.0.3) and SX20(TC7.1.4).In default setting, VSX5000 could not display from SX20 any video so we disable sending H.264 on SX20(xConfiguration Experimental CapsetFilter: "H.264RCDO;H.264NIL;H.264" ) ...
Hello Gents,It possible to combine CTS endpoint cdr which is connected to CUCM with TMS registered enpoint ?Customer want to see all endpoint cdr at TMS.Regards,Baris.
I am thinking about setting up my VCS with direct AD authentication for MOVI users. I have a group in the AD containing all our MOVI users. The problem is I do not see how to restrict authentication to only that group. I do not see a setting on the...
ALCON,Does anyone have a reference document that describes the cable pinout and the cable part number for the old TTC-6 not TTC-7 (MXP6000) codec connection to the TANDBERG UNIT III NTSC (analog) camera???? Any assistance would be appreciated. VRChet
This may be an easy fix, but I can't figure out how to change the NTP server on our VSOM. We want to set it to the one all of our other servers are connected to. We currently have 4 VSM servers and a VSOM server. I logged into V...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-19-2024 05:00 AM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM |