Hi,I have an issue with a VCS Expressway. I have no connection and the error on the front LCD is : "Missing LAN:eth3 "Do you have any idea of this error ?Thank you !
Hello,With CTS endpoints, there is alarm when the packet loss rate exceed 1% and the call is drop when another threshold (10%) is exceed. Do we have the same for EX90 or TC endpoint in general ? Can the call be dropped when exceeded a threshold ?I am...
Hi all, Now CSCup25163 (https://tools.cisco.com/bugsearch/bug/CSCup25163) are fixed in TC7.1.4 or TC6.3.2.I'm not sure these vulnerabilities do not matter whether we use self signed certification.Should we do factory reset like we did in Heartbleed a...
Community, I am setting up a lab environment with Lync 2013, VCS 8.1 along with an EX60 and Lync 2013 client. This is a very basic setup (no VCS cluster) just to demonstrate the integration capabilities. I do not have the interoperability license ins...
Hi everybodyWe recently bought 3 Telepresence sx20 devices, I configured them to work with our (Asterisk) SIP serverthe SIP configuration that I used is as following :Default transport: UDPLine: PrivateType: standardURI: 1030@xx.xx.xx.xxLogin name: 1...
Back when it was VCS and TMS, you could use TMS to push updates to many TC-based endpoints and it would manage that process. I'm wondering how this is done when CUCM is managing these endpoints, or if that's even supported. It'd be a pretty big fun...
Hi All,Just to share.I just upgraded my c20 from TC6.0.0 to TC6.3.1 (version that fixes the CVE-2014-0160 -aka Heartbleed bug).The upgrade worked fine but the interesting thing is that the user I used to log into the codec is gone after the upgrade. ...
Dears, Can i create a schedule conference when MCU is registered as a resource to CUCM, and also is it so MCU can call in the endpoints when it is scheduled. thanks
Hi All UC Experts,I want to deploy the Cluster over WAN on the Expressway 8.1.1 between the HQ site and the DR site. I am thinking can I deploy the peer Expressway to my DR site. I checked the doc: http://www.cisco.com/c/dam/en/us/td/docs/telepresenc...
Hi. My calltraceE20(TE4.1.3)-->VCS(8.1)-->CUCM(10)-->Jabber for windows(9.7)When I call by SIP the Incoming number is simonov@test.com It is OK. When I call by h323 the Incomming number shows simonov@<ip of cucm>My settings. VCS: Interworking is ON, ...
Hi All, If we have a CUCM-VCS integration for internal and outside calls via CTS/TX9000 end-points , does it applicable to TX9000 - TX9000 intercompany calls also, or do we still require B2B exchange integration for calls between two different compa...
Hi,We deployed VCS Control and VCS Expressway.The only protocol being implemented was purely SIP and only SIP ports were defined on the firewall.Internal SIP calls works fine as well as external using Jabber video registered on VCS Expressway calling...
