TelePresence and Video Infrastructure

Hi Folks, I have a basic and very small deployment involving VCS Expressway Starter Pack and some Jabber clients. VCS Expressway is using version 7.2.2 and it is configured with 2 interfaces, one connected to the external DMZ and other connected to t...

Hello, I am trying to upgrade a SX20, shipped with TCNC6.20 to TC7.02.After the upgrade the device complains about a missing release key.Checking the Troubleshooting page I see a valid TCNC key is installed.How do I get this unit upgraded from NC to ...

Hey all,We are looking into several option for low cost endpoints, especially for schools, which give a marked improvement on PC software and a webcam, but don't cost the earth.With Cisco impending arrival of the SX10, I wondered if anyone out there ...

Hi, I need a firewall traversal appliance I found the VCS Expressway appliance datasheet and it is suitable Can I use it with CUCM without having another box as VCS Control Or I should use two appliances [expressway and control] ? Can the VCS express...

VCS E/C 8.1CUCM 10.0SIP trunk (non-secure) from CUCM to VCSUsing DX650s/EX90s/C90 on CUCM side and EX90/C90/MX on VCS sideVCS to VCS video works greatCUCM to CUCM video works greatVCS to CUCM and CUCM to VCS calling is working just fine and SIP trunk...

Dear allI have a new TCS6.0 on UCS Server which is running very well.problem is as soon are open the Live unicast stream via WMP direct link rtsp://192.168.1.1/testlivesometime the stream are stopped and see the message "Network busy..." sometimes af...

We are using TMS 14.1.1 and currently have this pointing at one of our DC's in forest1\domain1.  This is working fine.  We have a 2 way Trust relationship between this AD forest/domain and a second AD forest/domain. Is it possible for us to provision...

Setup Diagram..Fortinet Firewall Rules1. Any ports/service between VCS control & expressway internal leg on internal f/w.2. Any ports/service on external firewall for VCS expressway.3. Natting with public IP on external f/w.All internal VC endpoints ...

Hi all, When I check the registrated CTS-3000 in Cisco Unified Call Manager, I attempted to create the log files. First, I clicked 'Capture New Log files'. After Capture complete, clicked Download existing Log file button. But downloaded file was cre...

As from TMSXE 3.1.2 there's a possibility to install it if no access to the AD from the server is possible.According to the installation guide you need to execute the installation with the following switch: "-NONADCONNECTIONMODE".But when I use it I ...

Hi all,I have 3 sites in which codec c60 are running. Now I have to install a new codec c60 in a new site (4th site). This new C60 is registered in a BE-6K in one of the other sites.Will I be able to setup simultaneous video calls from the new site t...

What is the difference between multi-point and multi-way video calls?

So my new project is to install the following new hardware: VCS Control / ExpresswayTMS with Exchange SchedulingTelePresence Server on Media 310 applianceCisco WebEx Meetings Server The customer has an existing installation of CUCM 9.x with a mix of ...