Resolved! Question on ISDN LINK
Dear ExpertI have an SX20 with TC6.0 and ISDN LINK with 1.1, Can I able to make a ISDN voice call on it?I able to make a video call but can't make a ISDN voice call, like dialing to a phone via ISDNThank youTung Chan
Dear ExpertI have an SX20 with TC6.0 and ISDN LINK with 1.1, Can I able to make a ISDN voice call on it?I able to make a video call but can't make a ISDN voice call, like dialing to a phone via ISDNThank youTung Chan
Other than bandwidth, are there any restraints/limitations as to how long a video conference could last?
Hello,We recently received a RMA MCU and about to replace the defective unit tomorrow. I need to know what is the proper procedure to backup and restore configurations for our Codian 4510 MCU? The MCU is in TMS and reoccuring meetings scheduled on ...
Hello Community,the self signed SSL certificate of our MSE8510 which was setup automatically during installation is expired. Is there a way to create a new direct on the box or is this something I have to do external and upload it?Has anyone a short ...
Just a quick one, does sell a premade cable to go between the C60 unit (D9) and the Cisco camera (RJ-45)? And if so what's the part number?Sent from Cisco Technical Support iPhone App
We have a VCS/VCS expressway/TMS already up and running. Now we want to integrate a MCU and our goal is to integrate Webex/Onetouch 2.0. What would be the best way to integrate our MCU with our current setup?
I've got automatic discovery on for soho, using a known good template. This has worked in the past, and works for internal clients. External clients show up as "Preregistered not added" when they first hit the external TMS IP. These used to automatic...
I have a setup like this: Phone 1 .....<SCCP>........CUCM cluster 1.......<H225>.........Gatekeeper 1.......<H225>.......CUCM cluster 2 .....<SIP>......SIP gateway (CUBE)...........SIP conferencing It is found that the Phone1 media flow is going like...
I have a SIP trunk between my VCS( x7.2.1) and CUCM (7.x) with no route pattern or sip route pattern, since I only want to allow voice calls from the VCS to UCM.When I call a CUCM endpoint (i.e 7975) )from a VCS registered endpoint(i.e. C60), the 797...
Good afternoon.We have a 3rd party service (onsip.com) that we register our C60 codecs with in order to place outbound telephone calls via the codecs. We've had no problem until we upgraded one of the C60 endpoints to 6.2.0 -- we have since rolled ba...
Hi,We are planning to offer a customer a few C40s with 3rd party recording solution. The recording solution is a capturing software working with a capture card. We connect the second display output of the codec to the PC. I know C40 now supports reco...
We have a deployment that has two TMS installs and a CMA install.The departments would like to maintain control of their endpoints, bridge, scheduling, which is why multiple TMS plus a CMA. Everything is integrated to one AD, but endpoints are not st...
Hi. I have trouble updateing a MX200 unit that is currently on tc 4.2.0. Anything higher (tried it with 4.2.4 and 5) gives me this kind of info in the log[ 0] [* ] Obtaining lock[ 1] [** ] Determining base directory[ ...
We are having an issue with our Telepresence system. Once we add an audio bridge for WebEx users, the system crashes. What is causing this? We restart the meeting and again as soon as an audio bridge for WebEx call is initiated the...
Hi I have a question about touch panel Cisco TelePresence Touch 8-inch for EX.I have this panel (CTS-CTRL-DV8=) and I need connect this touch to C40.Does anyone know of an adapter that will help connect my touch panel in the LAN and ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |