Hello,currently we have a cluster of two TMS-Server (13.2.1) installed on W2K3 Server with one database on a separat SQL-ServerFor having a smooth migration we thought of the following procedure.Adding two new Server with W2K8 R2 by installing TMS 13...
For the CME techs,Have 2691 multi platform router connected to 2924 switch. CME 4.1 installed with 12.4 IOSCan access routers website7912 phone has IP address, default g/way, DHCP, subnet but not call manager 1 listing/ID under Network ConfigurationC...
Like endpoint which has the clearpath enable to provide better video quality over a busy WAN link, will this become a feature in later version or MCU 45xx so that when user escalate the call to MCU, they can still enjoy the same level video quality? ...
hi all,i have sx20 quickset with isdn link device with 4 bri lines.i want to register the sx20 with VCS also.in sx20 there is no secondary network to connect the isdn link device.how i can configure isdn link to make outgoing and incoming call using ...
Hello all,We have C60 and Profile55 installed all over internally in our campus, there are 10 endpoints registered with VCS. None of the endpoints has Multisite license, multi point calls are done using MCU.Since we have only 10 traversal license, an...
Hi, I'm configuring a starter pack ver 7.2.1, currently I have registered an EX90 and I have set a SIP trunk with CM server 8.6 , I can call in both ways (VCS SP <--> Ip Phones). My next step is to registerd end points from outside and dial from oth...
Hey all,I'm gradually progressing on all this good stuff, so now I have a discussion on Video/Device Address Pattern (as applied to a user/group in TMSPE), FindMe and the possibility to creating some CPL (of which I know little, but it high on the To...
We currently have two phone books that we "Import to TMS" from their phone book source, but are looking to change that settings to "Search Only" due to the length of this particular phone book. I know instead of showing all the phone book entries in...
When you activate in TMS the option: "Auto Generate Password on New Conferences" where do you specify the length of the generated password?I searched in the conference templates on both TMS & MCU but could not find it.rgds, Geert.
Hello, I'm very lost ...I have:TMS14.2.2TMSPE1.1VCS7.2.2The keys: - Cisco TMS Provisioning Extension (100 active clients / devices) - Systems (10 systems) - Systems (100 systems).not work tms user portal, this option was removed?to have smartschel...
Hi,Our VCS (X7.2) doesn't have Enhanced OCS and FindMe license. So, in order to integrate with Lync, I must:Use no encryption since TLS needs Enhanced OCS. Media encryption in Lync is set to support encryption. Use static route in Lync to VCS domain....
HiNeed your advice on thisInstallation of profile 55" Dual with Floor Stand optionDoes anyone knows the recommended distance between Profile 55" Dual Floor Stand and the wall.I've already check profile 55" dual installation datasheet, but cannot find...
I want to export TMS users to a txt file so that I can give that file to another business unit, but I am not able to find much info on that.Any help is much appreciated.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
