TelePresence and Video Infrastructure

I have a VCS-C and VCS-E which I want to copy all settings and configs from and upload it to another VCS-C and VCS-E to move the servers to new location. I have a F5 with a global DNS alias that all endpoints and Movi register to, I would just change...

Team,I'm looking for some suggestions for scheduling.My customer has TMS with TMSXE installed now and want to do their scheduling using Outlook and the Cisco Form. The area where I am looking for some tips or guidelines is as follows.For multi-point ...

Hi ...As far i know, we can use two method content server connect with CUCM1. Register as h3232. Connect use SIPwhen i try to connect use SIP, it doesn't work when i try to make call use content server but the content server can be called by another ...

I have the following setup:EX90 TC5.xCUCM 8.6.2.XJabber 9.1VCS 7.2Jabber 4 Windows calls the EX90 registered to VCS.  The video comes on, audio is on, then it drops after 10 seconds.    Everything seems to be configured correctly with no TLS, just TC...

Dear Team, we have a MSE 8510 MCU , when we creating a conference and after adding the participants. Some of the participants video is not coming in the preview page of the conference control page.It is randomly not showing the video for any particip...

Dear Team,In our Organisation, we are not able to dial an endpoint on Public IP, the call is showing connected but no audio or video. But we are able to recieve the incoming call from a public endpoint on our internal endpoint with both audio and vid...

I am trying to dial out from our MCU to an endpoint with an IP addressi.e. 44001@xxx.xxx.xxx.xxx. I have "44" defined as an H323 prefix.When I try to out dial this number from the MCU it never goes to the traversal zone it keeps ending up in the Defa...

Hi guys ,I have unfortunately forgot my credentials for the TMS . Is it possible to reset them, to the default . And if yes could someone help me with the process that i should follow ? Thanks in advance .With Best Regards,George

Hello,We have a Prompt Administrator who makes changes to the Auto Attendant greeting via the prompt management ext.When they create an alternate greeting to use, it does not get applied.The AA Script being used is:  aa_sbcs_v03.aefI did NOT view the...

Which cisco device can replace the CUVC for interoperabilty?At this moment we have a CTMS and CUVC , so interop calls will be hosted onto the CUVC via the cascaded link between CTMS and CUVCNow the CUVC will be end of support and I would like to repl...

Hi there!I discovered a product called "ISDN Link" for connecting IP endpoints to ISDN network. After looking through it's spec it's not quite clear: is it possible to connect an MCU to ISDN network? Any ISDN-enabled endpoint connects through the net...

Hi,On C40/C60 codecs the H323 NAT Mode can be set to Auto, On or Off - see belowH323 NAT ModeThe firewall traversal technology creates a secure path through the firewall barrier, and enablesproper exchange of audio/video data when connected to an ext...