Hi , Please share with me the straight installation guide for this product Cisco TelePresence MCU 4510 , i am using Callmanager 8.6. Thank you Shib
Hi , Please share with me the straight installation guide for this product Cisco TelePresence MCU 4510 , i am using Callmanager 8.6. Thank you Shib
I am trying to delete the multisite option key for a EX90 endpoint.Does anyone know how can i do it ?I do not see any option through the webinterface that i could use to delete a option key.Regards,Guji
Hi all,We are planning to develop a web based scheduling system for MSE8510.In that system, we will enable AGC for every single conference room automatically using MCU's API.Will this burden CPU load of the MCU too much if some conferences come to ha...
Hi,I am having trouble registering a SIP SX20 with my VCS-E.I checked firewall rules (addresses and ports) and is as expected.I performed a "tcpdump" on VCS-E and captured the following information:172.X.X.2 = VCS-E172.X.X.65 = SX20~ # tcpdump -vvvv ...
Hi,We are installing the SX20 in our company, and we are having problems with making calls and authentication equipment.I had difficulties in obtaining documentation to list of ports to be included in the firewall, getting the list below but do not k...
I regularly connect two 3000mxp's together and do lengthy connections using duo video. I have been having a problem since I began connecting them together. I connect them in the morning like around 9am with duo video active. By about 7:30pm the reciv...
How is this field utilized through a VTC infrastructure? We envisioned that users with newer desktop devices (ex90) would see an image of the jabber user on thier touch pad controller (a white sillohete appears currently). We placed an accessible url...
What determines the 'Network Address' field below?The reason I ask is that we have (4) TMS servers, all serving different functions. We also have (4) VCS-Controls, one registered to each TMS for Provisioning. All the VCS-Cs are configured exactly t...
Hello!Equipment: Tandberg QuickSet C20 codecI upgraded this codec from version 3.1.5 to version 5.1.3, but, unfortunately, I don't have a release key for this version or version 4.x.x (quaranty expired). I have got uploaded release keys for versions ...
Dear all,We have deployed the Cisco TelePresenceManagement Suite Provisioning Extension with VCS control and Expressway with 7.2 while TMS with 13.2However, in the jabber client , the user can't search any endpoints and jabber client.In TMS Provision...
On our TMS server has expire SSL certificate. Therefore secure connection between TMS and VCS doesn't establish.Is anybody know how to renew TMS SSL certificate?
Hi all, Want to check if it's possible to disable the selfview during a multisite call?Problem:CST with MXP EP system connects to 2 other systems, MXP system uses its own built in MS function. Defaults to a 4-split layout, where it shows EP 1 in fram...
Hi all,we are experiencing a curious behaviour in TMS 13.1 (i need to double check the version).The TMS have 35 installed systems licenses and only 8 added systems, but sometimes, it show a pop up message on screen quith this phrase:Warning: Not eno...
Hi,We have a standard VCS-C/VCS-E setup, with VCS-C set to 'indirect', VCS-E set to 'direct' for calls to unknown IP addresses. This is working fine.The problem is we have a second remote office on MPLS which has Polycom endpoints(not registered to V...
in new infrastructure for videoconferencing, which is the best option, only CUCM or VCS with CUCM?what is the future of the VCS, if new versions of ex90 ex60 ... c20 sx20 .... come with direct integration to CUCM??Thanks to all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |