TelePresence and Video Infrastructure

I'm setting up a couple of EX90s and am following the latest Administering TC endpoints on CUCM8.6 guide:http://www.cisco.com/en/US/docs/telepresence/endpoint/codec-c-series/tc5/administration_guide/administering_endpoints_running_tc5_on_cucm8-6.pdfP...

hello,i just enable the CDR and CAR option in our call manager (version 8) and i try to make report for our telepresence devices. ( CTS500,1100,1300 and 3100 also some MX200 and EX90)The question his : the CDR can see my TP device or it's only for ph...

HiAt TMS (13.0.2 & 13.1.2) we can see calls in {system}/trapLog, but they're not shown in {system}/callLog section.That happens with some Polycom HDX endpoints, but for others the information appears correctly on both secions. We've compared configs ...

For MX200, is the port marked "For  maintenance only" the console port? Since the package didn't came with  any console cable, I used the usual console access with the 38400 baud,  but not successful. I changed the baud to 9600 via SSH, the same!  Th...

CTI-7010-TPSRV-K9 LIC-7010-TPSINTOPLIC-7000-TPSRV16CTI-7010-TPSRV-K9 LIC-7010-TPSINTOPAre enough to have CTS endpoints in meeting with 9 screens?Does the LIC-7000-TPSRV16 is just to upgrade from 9 to 16.What about CTS endpoints with TIP/DTLS without ...

Hello,I am looking to upgrade a CTS1300 from 1.6.4 to 1.9. Is this a stepped upgrade through 1.7.4? Is there a document that outlines an upgrade path? Also, how do I upgrade the phone Midlet along the way?Thanks in advance!Sent from Cisco Technical S...

I have devies registered to cisco CM and I want to be able to make Internet calls from those devices. Does anyone know of a step by step document ro do that with H.323 gateways or gatekeepers?  I know this can be done with VCS-C/VCS-E but I dont have...

HiWe have CUPS 8.6 and CUCM 8.6 and Jabber for windows 9.0.1 installed.Using Jabber, I can make video call by calling 9971 IP Phone.Problem is, When I select "Use my phone device to make call" from the bottom of Jabber instead of "use my compoter to ...

Hi,I saw an information about interoperability for CTS series and Codian MCU 4500. It says CTS supports Codian MCU 4500. Actually I am surprised. I used to know it is possible to make a multipoint conference with CTSes on only TPS server or CTMS. Cou...