TelePresence and Video Infrastructure

Hello Community!Got questions on VCS and they are as follows:(1). Taking aside MOVI, EX series & E20, does the VCS Starter Pack support other endpoints e.g SX-20, MX-300 e.t.c ?(2). What do we refer to as provisioning? (3). Do we need an extra server...

Dear Experts,In my organisation , i have a video conferencing unit that is natted with public IP for remote party to dial-in by IP. Now the new requirment is i need to reserve 6 Mbps of bandwidth for video/voice traffic (in/out) out of my total 32 Mb...

All,We are having the ASA Firewall which is inspection the default global policy, When we are running the Video Conference, the call suddenly disconnects and needs to be reinitiated and it goes for another MAX 10 Minutes, simultaniouslu I can able to...

I have video endpoints that are registered to the VCS. There's a SIP trunk link that connect VCS to CUCM 8.5. When a call is made from the video endpoint across the the trunk to the 7975 the calling name is not displayedAny thoughts. Its a mix unit o...

                   Can anybody help, my codec and phone are bothe registered to the call manager. On the phone i have an error HOST NOT FOUND because of this I cannot make calls out but the suprising thing is that I can recieve video calls from other...

Hi allIn the TMS if you have set Phonebook to the system, tms makes every day an Phonebook update on the system, the problem is now that this Event are growing form day to day and will be larger an larger. also the Email which sent the TMS server, wi...

I was trying to turn on streaming in the telnet interface and when i send the command "streaming enable on" i get a "only available on local ports"What does this mean?                  

Hello all,We currently have a VCS-C 6.0 but would like to upgrade to 7.x and use the B2BUA for calls to MOC/Lync clients through an edge server.  Is it necessary to have the Enhanced OCS Collaboration key on the VCS to do this, or is this needed only...

Hello All,We have several rooms with C40 codecs (version 5.1.0),   attached are the 8" Touch Control,  Dual 52" Screens.   Also attached is a conference room PC. via DVI, into the codec.Problem:Strangely,   when you tap "Presentation" on the Touch Co...