hi everybody,I need the part number for the below on dynamic configurator tool.Cisco Tanberg porofile 42" video conferencing device with wheel base (Tanberg profile 42")brsam
hi everybody,I need the part number for the below on dynamic configurator tool.Cisco Tanberg porofile 42" video conferencing device with wheel base (Tanberg profile 42")brsam
Hi everyone,I'm trying to connect my WAG160N configured as a ADSL modem (disable the router function) and connect a real router (RVS4000)So, i put my WAG160N on birdged mode only, disable the DHCPon my RVS4000, i did configure my PPPOE access (user a...
Hello All,We have 10 endpoints which is register with H323 and SIP to our HQ VCS(verX6). We have another branch where they has also endpoints which are registered with another VCS. Can we create an Inter Cluster Trunk for the VCS's so that we could c...
HelloAny update on TMSXE 3.0. When is it being launched. I am looking to integrate Exchange 2010 with TMS 13.1.2. Also another question is it must that the user has be present in TMS to book the meeting when booking through OUTLOOK. What kind of perm...
I have a New install of a CTS3210 running CTS1.8.1 code. The install team has done their due diligence in trying to address an error for the LCD seen in the staus window on the codec. When you drill down the LCD shows 'power status unknown'.The LCD w...
Are there currently any, or plans for certicifications through Cisco that is based upon the acquired Tandberg products, such as VCS, MCU, etc?
The MX200 documentation says it is "bluetooth-ready" and supports "bluetooth for future applications." My customer requirement is to disable bluetooth completely. On laptops we physically remove the bluetooth radio.How would I completely disable bl...
Hi All,I have 3000MXP Unit and CCM version 4.2.3, Please, I want Any Doc to help me to Integrate this V.C Unit With the CCM.Thanks
Hi,We have VCSe, VCSc and TMS working with provisioning on VCSc via TMS.VCS Version 6.1, TMS 13.1The external Movi Clients (4.3) have registration with VCSc. VCSe does proxy for registration.The Users have been configured on the TMS. There's still no...
I just wanted to verify that it's possible to do a point to point call between two profile 42c20 units without a VCS or CUCM. They are connected via a WAN so it's just IP to IP correct?Also, the SX20 quick set that is capable of multiway can do a mul...
Regards,How I can integrate CTS3210 and CTS1300 with RadVision ?1) I can integrate them only CUCM with GK RadVision by H.323 trunk to CTS3210 and CTS1300 communicate with RadVision endpoints end-to-end by RTP?OR2) I can integrate CUCM - VCS with GK R...
Have Movi user runing 4.2.0.10318 and is registering thru our Expressway, been informed that randomly he would receive a message indicated in the diagram below. Check on TMS and the VCS Expressway and everything looks fineWondering if you have encou...
Hello, I have a customer that requires additional auto attendant customization beyond the basics (banner and voice prompts). I was hoping to be able to change the background of the main menu and to personalise the text incoming callers see... Can I p...
Is there any way of changeing the default presentation layout in the C-type codecs? Now if you start it with a 4:3-resolution the far end is placed at the right in a small picture. And if you start it with a 16:9 resolution the far end is in a small ...
Hello,In the following setupMSE 8710 (TelePresence Server 2.2(1.43)) <--------- SIP -----> VCS (x5.2) <------ SIP-----> CUCM 7.0.2 <------SIP-----> CUCM 8.5.1 <-----------> CTS 1.7.2While hosting calls on the TelePresence Server to CTS endpoints, the...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |