Hello All,Does anybody know how many concurrent Movi client can both the VCS/TMS handle/ register ?regards
Hello All,Does anybody know how many concurrent Movi client can both the VCS/TMS handle/ register ?regards
How do I create search rules on my VCS-E to route any calls direct to its IP or host name to go internal to Codian MCU auto attendant --> My autoatendant has a conference ID of 31 and we use 99 registered in my VCS-C internal - so 9931). We have had...
I have two E20 ip-phones with ‘best effort’ encryption settings. Software - TE4.0.0.246968. When I didn’t set the VCS address in the menu, a p-t-p call has the encryption. Only I set any TMS settings (real or fake), the p-t-p call becomes non-encrypt...
Hi all,How to make groups of phonebook or Endpoints list in Cisco MCU (codian), i look into the MCU and i not found some setting like that.so we can make a call to many endpoints in the list with one step (like Tandberg MPS just call the group folder...
Hi all, I have a CUCM running version 8.6.1 and a VCS server running version X7.03 and a MOVI client configured to work with the VCS.My VCS has a 11 digit calling convention and most numbers are of the form 0111512XXXX. I have a SIP trunk from the c...
Hi experts,Next week I have new deployment for Cisco telepreance with the following BOQ:Video endpoints:-C20 ---TC 4.4 (plan to register with VCS-e)- EX 90 ---- TC 4.4 (plan to register with VCS-e)- Movi --- 4 (already include ...
We are currently running CUCM 6.1.5. I proposed our organization to upgrade our system to 7.x or 8.x. But am asked the best and standard cliche question " Give some good reason to upgrade and we will do it" Can anybody justify the reason why to upgra...
Hi folks, I need your help.In our client, we have a cisco c60 codec and we are facing a problem in it. We have two cameras in codec c60. We have made a custom layout in TC console software to send both cameras during the conference. We have the follo...
Hello all,One of my clients asked me about the CAD drawing of the floor of a CTS-3210.I found some forms to visio but not CAD drawings of the equipment.Can these pictures be downloaded from any website?
Dear all,Anyone knows the detail of the CTS-3010 option,as we see there are three options in the autocollaborate.1.CTS-HFR-COLLAB-3K Cisco TeleP High Frame Rate Auto Collab for CTS-3000/32002.CTS-HFRCOLLAB1K-CH CTS 1100 HFR Codec for china3.CTS-HFRCO...
Hi Everyone,we need a cisco telepresence system that can accomodate about 60 participants.Can cts-3010 achieve this? which CTS can accommodate this?brsam
When we add a new conference on MSE8510(Ver4.2), an error message below was outputted.(The conference was added on the MSE8510)Moreover the added conference wasn't registered with VCS Control, so we couldn't connect the conference even though we dial...
Hi,Could you please advice if F8.2 PAL and F8.1 PAL MXP versions are compatile with Cisco VCS v.X7.0.3 and Cisco TMS v.13.1.2With Best Wishes and Regards,Nikolay
Hi all,Problem StatementExternal Movi calling internal EX90 or CUCM extensions, No audio/video at allSetupVCS Express is placed at the DMZ zone with public IP address that is NOT NAT-edVCS Express X7.0.2 (0 Non Traversal Calls, 5 Traversal Calls, 50...
Cisco 2800 Router | I am having problem, calls are dropping frequently. ISP Side is fully tested, problem in router. calls are even dropping between localextensions---Posted by WebUser Amjad Ali
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 10:41 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM |