I see there are transcoder options for the MC03 and MC06 MCU but none for the MC10A. How do I provide transcoding for this MCU?
The content you are looking for has been archived. View related content below.
I see there are transcoder options for the MC03 and MC06 MCU but none for the MC10A. How do I provide transcoding for this MCU?
Hi,I'm putting together a spec to have 35 FXS ports routed directly to the PSTN via an ISDN PRI. Can anyone foresee any issues with doing this with a 3745, fitted with 3 x NMHDA-4FXS + 3 x EM-HAD-8FXS + appropriate PWDM2 mods + NM-HDV-E1 (or AIM-MFT...
Does anyone have this working either on corporate LAN or over VPN from home office?Geoff
Can someone guide me how to configure the PGW, it would be great if someone send me link where i can get related info.
DOES IT WORK?can I be in a network (behinde nat ) and use all the functions of voip?must I have static nat??
Dear all,Can anyone tell me how a simple Video over ip solution will look like ? What are all the minimum components required to make the solution complete? Thanks and Regards,Rajaraman. R
We are planning to put our 3620 MCM gatekeeper outside the firewall so that our Internet and Intranet users can perform videoconferencing using client such as Netmeeting. How do we restrict the Internet users for registering to the gatekeeper? Crea...
ATA 186 version 2.16Cisco 3662 12.2(15)T7Open Source H.323 GatekeeperNAT translation with ALGI am running an ATA186 connected into the inside interface of a 3662 running NAT. The outside interface has an open source H.323 Gatekeeper connected on the...
Dear Netpro,I am planning to implement QoS in my environment, this is to support two avaya call managers (or PBX's) that are located in separate sites connected via a laser link.Basically, the primary objective is to give these priority, all other tr...
Hi,Thanks in advance for your help. Let me describe the issue briefly.-Our system is configured with Video Streamer (winsend on PC),Cisco 7609 and DSLAM with ATM traffic.-Video streamer is connected to Cisco 7609 FE port.-The video traffic is routed ...
I have a user who requires using a polycom video teleconferencing unit at one of my sites that has a t-1 frame-relay circuit. The video is extremly choppy and sometimes completly freezes. I was wondering if there was any particular qos for frame-rela...
I am working with a developer who has been using a router with the default IOS TCL script (session) to playout IVR like prompts and collect digits before routing the call - normal stuff really. But the time has come to scale this to real world platfo...
Dear sir,I have a module NM-HDV-2E1-60. That module need to be replaced. But the serial number of 'show diag' can't be recognized on SCC. Doesn't NM-HDV-2E1-60 have a serial number?Can anybody tell me something?Thanks very much.Sha
Dear allIs there a method to use the mrtg to monitor the gk current endpoint and current active call?any homepage or link will provide this information?Router 3620thx thx
ALLi very need to set the router which the traffic from which host, the traffic will pass through ip precedence 5, not by port level, is host level. which link i can refer, thx thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |