cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1228
Views
4
Helpful
2
Replies
Highlighted
Beginner

BFCP through CUBE

Hi!

Is it possible to pass BFCP/UDP thru IOS CUBE (not the SP Edition)?

We have following setup:

CTSendpoint(1.8)>---------<UCM(8.6.2)>-----<SIP trunk>-------<CUBE 2821/15.1(4)>-----Zone------<VCS X5.1>-----------------<TP8710 (2.2)>

                                                                                                                                                |-----other SIP video endpoints

All standard video content is passed thru normally, but how about BFCP and presentation content? I know that SBC @ ASR1000 has support for that, but is there way to do same with IOS based cube???

/Mikko

Everyone's tags (5)
2 REPLIES 2
Highlighted
Engager

Re: BFCP through CUBE

Hi Mikko!

For now I would assume not, as I see the CUBE like a MTP / RSVP / TRP which is ruled out:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08video.html#wp1154149

I would assume that more is coming in the future.

You should also consider about upgrading your VCS to X7.x.

With an VCS-E instead of the CUBE I could picture you deployment would work

Maybe Andreas has some more info.

Please remember to rate helpful responses and identify

Beginner

Re: BFCP through CUBE

Hi Martin.

Thanks for info - it looks like that given link describes case I'm falling into

I need to think about VCS-E, although in my case, it is not fastest solution...

/Mikko

CreatePlease to create content