11-13-2012 04:32 AM - edited 03-18-2019 12:07 AM
Hola a todos.
¿De qué manera puedo generar un backup de la configuración completa del terminal Cisco Quick Set C20?
Debo crear un manual para que 'Personas no Técnicas' realicen los backup de decenas de equipos.
Yo puedo hacerlo utilizando Putty, conectándome por Telnet y con el comando xconfiguration obtengo lo que necesito.
Puedo extraer los archivos .xml pero no sé de qué manera puedo hacer un 'Import' de estos archivos.
¿De qué manera puedo generar un backup, de una forma SUPER simple, de la configuración completa del terminal Cisco Quick Set C20?
Necesito respuestas pensadas en las versiones 4.1.0, 4.2.2 y 5.1.3
Muchas gracias, a los que opinen.
Solved! Go to Solution.
02-18-2013 03:25 AM
Hola Jorge,
puedes acceder por SCP a los equipos y hacer una copia del fichero config.db (/mnt/base/active/config.db)
Puedes descargar el WinSCP (gratis) si usas windows, para conectar al equipo (puerto 22 con usuario root).
Para hacer el restore, basta subir este fichero al mismo equipo con la misma versión.
OJO: si vas a hacer la copia de seguridad de mas de uno, todos tendrán el mismo nombre y deberá organizarlos por carpetas, indicando el equipo y la versión. No debes subir el fichero config.db de una versión distinta a la en uso.
También no estarán incluídos los certificados, que deberán se copiados por separado.
*El TMS también haría las copias de seguridad de una manera muy sencilla y es lo mas recomendable.
Saludos
04-24-2013 09:33 PM
Hi Yusuke, All,
Fix for BUG # CSCue65698 is available in TC 6.1 software release and can be downloaded from
http://software.cisco.com/download/release.html?mdfid=283645026&flowid=21869&softwareid=280886992&release=TC6.1.0&relind=AVAILABLE&rellifecycle=&reltype=latest. Also refer to the release note of this version.
BR, Mahesh Adithiyha
11-13-2012 04:54 AM
Hello,
from the limited Spanish I can read I assume you want to make a backup of a Quickset C20. I am running TC6.0.0 beta release which has a backup/restore tab in the GUI. Can you check your release and see whether you have such a tab ?
It is under Maintenance -> Backup and Restore.
11-13-2012 05:26 AM
Thanks you too much for your response.
I am using TC5.1.4.295090 and do not have the backup and restore options.
I take the opportunity to ask you, have the TC6.0.0 software version the dial speed 1024 Kb/s
02-17-2013 11:12 PM
Hi Danny,
Your picture shows;
"Configuration loaded from file, 297/298 were successful"
I wonder why not "298/298"?
I tested C20 and SX20(both of them are release version TC6.0.0) and result is same.
This is the only cosmetic issue or restore was not completed?
regards,
Yusuke
02-18-2013 05:35 AM
Hello,
I opened a ddts for the restore error message.
CSCue65698 - Restore via WEB interface shows one line not being restored?
Danny.
02-18-2013 05:23 PM
Hi Danny,
Thank you for it.
I confirmed that AllowWebSnapshots isn't restored by WebUI because it must be configured from Touch, OSD or Serial console.
I'll follow about fixing this issue by checking CSCue65698.
regards,
Yusuke
11-13-2012 05:00 AM
Hi Jorge.
You can backup the system by using putty and typing xconfiguration - you will then get the system config.
You will get output like this:
*c xConfiguration ISDN SendNumber: On
*c xConfiguration ISDN ParallelDial: On
*c xConfiguration ISDN HLC: Off
*c xConfiguration ISDN SpeechTimers: On
*c xConfiguration ISDN MSN: Off
*c xConfiguration ISDN SubAddress: ""
You have to remove the " *c " in order to be able to copy the configuration back on the system. You can use notepad for this:
xConfiguration ISDN SendNumber: On
xConfiguration ISDN ParallelDial: On
xConfiguration ISDN HLC: Off
xConfiguration ISDN SpeechTimers: On
xConfiguration ISDN MSN: Off
xConfiguration ISDN SubAddress: ""
Just copy this into putty to apply your backup configuration.
Translation :
Hola Jorge.
Puede copia de seguridad del sistema mediante el uso de masilla y xconfiguration escribir - se podrá obtener la configuración del sistema.
Obtendrá una salida como la siguiente:
*c xConfiguration ISDN SendNumber: On
*c xConfiguration ISDN ParallelDial: On
*c xConfiguration ISDN HLC: Off
*c xConfiguration ISDN SpeechTimers: On
*c xConfiguration ISDN MSN: Off
*c xConfiguration ISDN SubAddress: ""
Usted tiene que quitar el "* c" con el fin de ser capaz de copiar la configuración nuevamente en el sistema. Usted puede utilizar Bloc de notas para esto:
xConfiguration ISDN SendNumber: On
xConfiguration ISDN ParallelDial: On
xConfiguration ISDN HLC: Off
xConfiguration ISDN SpeechTimers: On
xConfiguration ISDN MSN: Off
xConfiguration ISDN SubAddress: ""
Sólo tienes que copiar esto en masilla para aplicar la configuración de copia de seguridad.
//Marius
11-13-2012 05:32 AM
Thanks you Marius, I can do that right now. But, Is there any easier way to make it?
I have to write a guide to non technician peolple who don't know how to use Putty.
Any way, I think that your response is the correct way.
Thanks both, Marius and Danny
11-13-2012 05:36 AM
This is a new feature for the new TC6 software, I do not have a release date for it.
So in the current available versions, the guide above is the way to do it.
//Marius
02-18-2013 03:25 AM
Hola Jorge,
puedes acceder por SCP a los equipos y hacer una copia del fichero config.db (/mnt/base/active/config.db)
Puedes descargar el WinSCP (gratis) si usas windows, para conectar al equipo (puerto 22 con usuario root).
Para hacer el restore, basta subir este fichero al mismo equipo con la misma versión.
OJO: si vas a hacer la copia de seguridad de mas de uno, todos tendrán el mismo nombre y deberá organizarlos por carpetas, indicando el equipo y la versión. No debes subir el fichero config.db de una versión distinta a la en uso.
También no estarán incluídos los certificados, que deberán se copiados por separado.
*El TMS también haría las copias de seguridad de una manera muy sencilla y es lo mas recomendable.
Saludos
02-18-2013 06:34 AM
Muchas gracias, Elter.
la próxima vez que tenga un CIsco C20 en el laboratorio intentaré lo que dices para estar seguro que ese archivo contiene toda la información.
Por ahora lo he visto en un C20 que tengo en producción y he encontrado el archivo, y obtuve algo como esto:
...
103 U 26 /Video[1]/Configuration[1] 28 DefaultPresentationSource[1] 36 litr 2 TTPAR_PresentationSources_2 0 43662
79 U 26 /Video[1]/Configuration[1] 19 AllowWebSnapshot[1] 21 litr On TTPAR_OnOff 0 35479
104 U 26 /Video[1]/Configuration[1] 22 SelfviewPipPosition[1] 43 litr LowerRight TTPAR_SelfviewPipPosition 0 61576
109 U 45 /Video[1]/Configuration[1]/Input[1]/Source[1] 16 MotionProfile[1] 35 litr Medium TTPAR_LightConditions 0 6237
106 U 45 /Video[1]/Configuration[1]/Input[1]/Source[1] 10 Quality[1] 38 litr Sharpness TTPAR_MotionSharpness 0 10884
116 U 45 /Video[1]/Configuration[1]/Input[1]/Source[1] 20 ResThreshold60fps[1] 38 litr Never TTPAR_ResThreshold60fpsVs 0 8112
...
Muchas gracias nuevamente.
04-24-2013 09:33 PM
Hi Yusuke, All,
Fix for BUG # CSCue65698 is available in TC 6.1 software release and can be downloaded from
http://software.cisco.com/download/release.html?mdfid=283645026&flowid=21869&softwareid=280886992&release=TC6.1.0&relind=AVAILABLE&rellifecycle=&reltype=latest. Also refer to the release note of this version.
BR, Mahesh Adithiyha
04-25-2013 06:08 PM
Thank you Mahesh,
I confirmed the bug is fixed in TC6.1.0 with my C20.
AllowWebSnapshots is removed from configuration.tsh.
regards,
Yusuke
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide