I have just set up a C20 VTC in our conference room. This equipment was purchased before I got to here and after setting it up I have found out that our company only has ISDN VTC. So I need to get a converter from IP to ISDN. From searching online and forums posts it sounds like I could use the Cisco TelePresence ISDN Link. Is this correct? I want to get verification that this would work before presenting it up and putting in a purchase request.
As Martin has mentioned, the Cisco TelePresence ISDN Link will be a good solution for a single device. But if you have multiple devices on site that require ISDN, you may want to look in to one of the larger ISDN Gateway products (ie a Cisco TelePresence ISDN GW 3241) adn converting all your intra site traffic to IP.
Please remember to rate responses and to mark your question as answered if appropriate.
Wayne -- Please remember to rate responses and to mark your question as answered if appropriate.
on January 25th and 26th, we're hosting a Technical Enablement Workshop which will guide you through the steps involved in updating your organisation from Jabber and/or Meetings to Webex App.
Very useful for partners and for customers t...
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...