cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
401
Views
0
Helpful
1
Replies
alberto.orden
Beginner

Cable specification for CTS3010 and CEILING VISUALIZER VZ-C32 (WOLFVISION) Doubt

Hi to all          

Can you confirm the cable specification to connect the Document Camera to the CODEC and which way round it needs to go?

As I understand it we need a DVI (Camera end) to HDMI (CODEC end) cable plus one CAT5/CAT6 cable.  Can you please clarify?    

Best regards 

1 ACCEPTED SOLUTION

Accepted Solutions
Paula Talamo
Cisco Employee

Hello Alberto,

You are correct.  You will need an ethernet cable (CAT5 is fine) from the camera to the primary codec as well as a DVI-HDMI video cable from the camera to the primary codec.

HTH,

Paula

View solution in original post

1 REPLY 1
Paula Talamo
Cisco Employee

Hello Alberto,

You are correct.  You will need an ethernet cable (CAT5 is fine) from the camera to the primary codec as well as a DVI-HDMI video cable from the camera to the primary codec.

HTH,

Paula

Create
Recognize Your Peers
Content for Community-Ad