We have 20 or so Call Pickup group's on our CCM, all are working except for one which does play up from time to time. The number doesn't conflict with our dial plans at all.
I've removed the first Call Pickup group number and then assigned the group of 4 phones ( a 7960 and 3 * 7940's) a different Call Pickup no. This seemed to fix the problem for a little while, but the users of the phones are still complaining that they can't pickup calls occasionally.
We are running CCM 3.1(3a) on Win2K SP2. The phone load's are P00303010108.
I've seen the same problem happening on a CCM Cluster running 3.1.2c. It seemed to be a problem in the syncronisation between the publisher and the subscriber. All the phone register with the subscriber, but all config changes are made on the publisher. Because of the sync issue the configuration was not synced correclty.
Try making a new callmanager-group, if you have a CCM cluster. Then have the 4 ip phones register with the other CCM and try ussing the pick-up group again !
The 2021 IT Blog Awards, hosted by Cisco, is now open for submissions. Submit your blog, vlog or podcast by Friday, December 3.
To learn what's new in this year's competition or to gain insights into the judging considerations, check out t...
Greetings, Wanted to share a few lessons learned while migrating from a distributed to centralized IMP deployment. Our current setup included many CUCM/IMP distributed clusters with centralized Expressway server for MRA login. We did not wish to perf...
Parsec's Cisco UCCE/PCCE CC Connector application for CRM works as a bridge between the CRM and Cisco UCCE/PCCE CC solution.The CRM can be any cloud based CRM like Salesforce (SFDC), ServiceNow ,MS Dynamics or a 3rd party CRM.The CRM user/Agent will have ...
It’s a feature which allows CUCM to determine whether the phone is in its home location or a roaming station.By enabling this feature users can roam from one site to another site and acquire the site-specific settings such as Codecs, MRGL, Call rout...