09-27-2016 09:20 AM - edited 03-18-2019 06:25 AM
Just wondering if I can setup MRA and B2B under the same Expressway boxes.
I read somewhere that I'd need to distinct Expressways clusters, but can't seem to find the same info again.
Thanks
Solved! Go to Solution.
09-27-2016 10:55 AM
You can use the same EXP - C&E box to host B2B and MRA. Refer Table 5 of below document:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/release_note/Cisco-Expressway-Release-Note-X8-8.pdf
Regards
Deepak
09-29-2016 04:17 AM
Hi,
Yes, both MRA and B2B can be deployed on same Expressway Core and Edge.
You just need to create two traversal zones with different SIP and H323 ports.
Here's a good guide on how to deploy both MRA and B2B in same Expressway boxes:
Collaboration Edge Using Cisco Business Edition 6000 CVD
regards,
Acevirgil
09-27-2016 10:55 AM
You can use the same EXP - C&E box to host B2B and MRA. Refer Table 5 of below document:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/release_note/Cisco-Expressway-Release-Note-X8-8.pdf
Regards
Deepak
09-29-2016 04:17 AM
Hi,
Yes, both MRA and B2B can be deployed on same Expressway Core and Edge.
You just need to create two traversal zones with different SIP and H323 ports.
Here's a good guide on how to deploy both MRA and B2B in same Expressway boxes:
Collaboration Edge Using Cisco Business Edition 6000 CVD
regards,
Acevirgil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide