cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2858
Views
10
Helpful
2
Replies
Highlighted
Beginner

Can I configure MRA and B2B under the same Expressway-C and Expressway-E

Just wondering if I can setup MRA and B2B under the same Expressway boxes. 

I read somewhere that I'd need to distinct Expressways clusters, but can't seem to find the same info again.

Thanks 

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Cisco Employee

You can use the same EXP - C

You can use the same EXP - C&E box to host B2B and MRA. Refer Table 5 of below document:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/release_note/Cisco-Expressway-Release-Note-X8-8.pdf

Regards

Deepak

View solution in original post

Highlighted

Hi,

Hi,

Yes, both MRA and B2B can be deployed on same Expressway Core and Edge.

You just need to create two traversal zones with different SIP and H323 ports.

  • Traversal Zone for MRA
  • Traversal Zone for B2B

Here's a good guide on how to deploy both MRA and B2B in same Expressway boxes:

Collaboration Edge Using Cisco Business Edition 6000 CVD

regards,

Acevirgil

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

You can use the same EXP - C

You can use the same EXP - C&E box to host B2B and MRA. Refer Table 5 of below document:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/release_note/Cisco-Expressway-Release-Note-X8-8.pdf

Regards

Deepak

View solution in original post

Highlighted

Hi,

Hi,

Yes, both MRA and B2B can be deployed on same Expressway Core and Edge.

You just need to create two traversal zones with different SIP and H323 ports.

  • Traversal Zone for MRA
  • Traversal Zone for B2B

Here's a good guide on how to deploy both MRA and B2B in same Expressway boxes:

Collaboration Edge Using Cisco Business Edition 6000 CVD

regards,

Acevirgil

View solution in original post

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey