Can't control the SX20 Codec via the CTS-PHD1080P12XS2 with TRC5 remote. Need help troubleshooting
I have the following hardware :
SX20 Codec with firmware TC7.3.6.ea51021. The codec is connected to a CTS-PHD1080P12XS2 camera with a CAB-PHD4XS2-SPLIT cable. I have a TRC5 remote, which has to be compatible with the TC software The problem however is that I can not control the Codec with the remote via the Camera. The idea is that the camera's IR sensor will get the commands from the remote and pass them to the codec, but it doesn't seem to work for some reason.
Whenever I press the arrows on the remote, the camera moves, when I press the Home button on the remote I can see the camera LED blinking ( it's constantly green and when I press the button it blinks, so it appears to get the signal ) but the command doesn't get through to the Codec. When I am directly above the Codec's IR sensor with the remote I can pass commands to it - I can browse the menu and so on. So the close-proximity IR on the codec works. But for some reason when I try to control the codec via the camera it doesn't work. Any ideas on what I am doing wrong ?
Re: Can't control the SX20 Codec via the CTS-PHD1080P12XS2 with TRC5 remote. Need help troubleshooting
If you can move the camera with the remote but not dial, hang up, etc, it looks like you don't have a serial connection between the camera and the codec. If you're in a call, can the far end control your camera? I'll bet it cannot.
Read this post - the user had the exact same scenario, you'll probably need to create a custom cable.
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From email@example.com (Gateway - Private IP 172.24.10.6) and i need firstname.lastname@example.org (Gateway - Public IP 18.104.22.168). How can I change in theGateway the ...
Need some help with a gadget development. Have a gadget built however it triggers when a call comes to an agent and immediately after when the agent goes into "RESERVED" state. I need to pop a window that is working however the pop happens bef...
Being a global business we require the ability to customise meeting templates for specific groups of users and not just have a single template globally, this is a branding requirement and is very important to us when dealing with clients. We also ne...