cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
264
Views
10
Helpful
3
Replies
oquindle.bennett
Beginner

CDP Mode Problem

I recently changed some setting on our devices. CDP was on of those setting I changed from on to off. I've notice when changed on SX 80. I have no HTTPS response afterward. I'm unable to log into device.  Below are the setting that I changed. Hopefully it helps. I didn't include the ip address in the api 

 

Note: On DX 80s', I don't have this issue.

 

xconfiguration conference Encryption mode:on

xconfiguration conference MaxReceiveCallRate: 3072

xconfiguration conference MaxTotalReceiveCallRate: 3072

xconfiguration conference MaxTotalTransmitCallRate: 3072

xconfiguration conference MaxTransmitCallRate: 3072

xconfiguration conference AutoAnswer Delay: 0

xconfiguration conference AutoAnswer Mode: off

xconfiguration conference AutoAnswer Mute: off

xconfiguration conference DefaultCall Rate: 3072

xconfiguration conference FarEndControl Mode: off

xconfiguration conference FarEndControl SignalCapability: off

xconfiguration HttpClient AllowHTTP: False

xconfiguration HttpClient AllowInsecureHTTPS: False

xconfiguration HttpClient Mode: off

xconfiguration HttpClient UseHttpProxy: off

xconfiguration HttpFeedback TlsVerify: off

xconfiguration HttpFeedback UseHttpProxy: off

xconfiguration Logging CloudUpload Mode: off

xconfiguration Logging Debug Wifi: off

xconfiguration Logging Internal Mode: On

xconfiguration Logging Mode: On

xconfiguration network 1 DNS DNSSEC Mode: off

xconfiguration network 1 DNS Domain name:

xconfiguration network 1 DNS Server 1 Address: xx.xx.xx.xxx

xconfiguration networkservices CDP Mode: off

xconfiguration networkservices H323 Mode: on

xconfiguration networkservices SIP Mode: on

xconfiguration networkservices Websocket: off

xconfiguration networkservices WelcomeText: on

xconfiguration networkservices XMLAPI Mode: on

xconfiguration networkservices SNMP CommunityName: usarc

xconfiguration networkservices Mode: off

xconfiguration networkservices SSH AllowPublicKey: off

xconfiguration networkservices SSH HostKeyAlgorithm: RSA

xconfiguration networkservices SSH Mode: on

xconfiguration networkservices Wifi Allowed: false

xconfiguration networkservices Wifi Enabled: false

xconfiguration phonebook server 1 id:default

xconfiguration phonebook server 1 Pagination: enabled

xconfiguration phonebook server 1 TlsVerify: off

xconfiguration phonebook server 1 type:TMS

xconfiguration phonebook server 1 url:

2 ACCEPTED SOLUTIONS

Accepted Solutions
oquindle.bennett
Beginner

Figured out the issue. Turning off CDP mode shut off the IP address of the system. 

View solution in original post

It would not shutdown the IP address as such, but the system would not get information from the switch to know what VLAN it is situated in as that is carried in CDP.

Please rate all useful posts

View solution in original post

3 REPLIES 3
oquindle.bennett
Beginner

Figured out the issue. Turning off CDP mode shut off the IP address of the system. 

View solution in original post

It would not shutdown the IP address as such, but the system would not get information from the switch to know what VLAN it is situated in as that is carried in CDP.

Please rate all useful posts

View solution in original post

Thanks you for your response. I figured it out after doing some research on CDP, which I had no idea about. I'm appreciative that you explain it simple and to the point. 

Content for Community-Ad

Spotlight Awards 2021