cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
193
Views
0
Helpful
1
Replies

Changing DefaulCallRate through CUCM

Hi!

 

We have recently changed the settings for videoconferencing to register with CUCM.
We currently have a compliance service that verifies that all equipment is set to a certain standard.
It turns out that whenever we register a videoconference (independent of the model) in the CUCM, the value of the DefaultCall Rate is changed to 6000

I searched in several places and did not find where to change this value in CUCM so that it stays in the value that we want.

Can you help me?

1 REPLY 1

Generally speaking, you control per-call bandwidth of CUCM-registered endpoints using Regions within CUCM. Be aware that there are also Service Parameters governing the default bandwidth if you don’t define it at the Region level.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/cac.html
Content for Community-Ad

Spotlight Awards 2021