from all the documentation that I can see as you are not able to set softkey templates on the 9951 all the video ones should prompt automatically when a phone call is activated.
We have a CUCM with 7.1(5) running which supports the video capability and it is enabled
On the phone it is enabled also through the preferences and you are able to preview the video when not on a call
It is just when you are in a call only the basic softkeys are showing as attached.
Am I missing anything?
First you can modify the softkeys with the Feature Control Policy.
Regarding your problem. The video transfer starts automatically if both sides are video enabled and ready.
Are you sure that both sides can display a video and it's enabled at both devices?
- Please rate helpful posts -
Thank you for the reply
The feature control policy does not have any voice soft keys just basic features, at least it doesnt in 7.1(5)
I thought it could be a firmware issue on the 9951, we are currently running sip9951.9-1-1SR1, however i have not been able to find any documentation that implys a fix for and video softkeys.
and yes video is enabled on both endpoints.