cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco 9951 sip srst configuration

li007il89
Beginner
Beginner

Hello,

Could you please help me with such problem?

 

I have sip 9951 cisco phone.

I've configured srst for it. It can successfully register to cisco router after WAN failure, but when WAN goes back, it doesn't want to register back to CUCM.

 

voice service voip
no ip address trusted authenticate
address-hiding
mode border-element
media forking
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 120 min 60
asymmetric payload full
video screening

 

voice register global
system message SRST Mode
max-dn 20
max-pool 10
application default

voice register pool 2
id network 10.2.200.0 mask 255.255.255.0
application default
preference 1
dtmf-relay rtp-nte sip-kpml cisco-rtp
codec g711alaw
no vad

 

application
global
service alternate Default

 

#sh call-manager-fallback
CONFIG (Version=9.1)
=====================
Version 9.1

 

Best regards,

Uladzimir Hryharovich

 

 

0 REPLIES 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: