Cisco AS5300 with c549 say 30 Voice Channels

bob · ‎11-29-2002

Cisco AS5300 with C549 in "show version" report only 30 Voice Channels. I'm confused because I think it should say 60 Voice Channles.

What is wrong? Am I wrong?

------

Cisco Internetwork Operating System Software

IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(2)XB6, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Compiled Mon 17-Jun-02 18:23 by hwcheng

Image text-base: 0x600089B0, data-base: 0x6111E000

ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTLDR: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE SOFTWARE (fc1)

ciscoAS5300 uptime is 21 hours, 14 minutes

System returned to ROM by reload at 20:22:24 UTC Thu Nov 28 2002

System restarted at 20:23:12 UTC Thu Nov 28 2002

System image file is "flash:c5300-is-mz.122-2.XB6.bin"

cisco AS5300 (R4K) processor (revision A.32) with 131072K/16384K bytes of memory.

Processor board ID XXXREMOVEDXXXX

R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

Backplane revision 2

Manufacture Cookie Info:

EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,

Board Hardware Version 3.2, Item Number 800-2544-04,

Board Revision B0, Serial Number XXXREMOVEDXXX,

PLD/ISP Version 0.0, Manufacture Date 13-Jul-2000.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

128 Serial network interface(s)

4 Channelized E1/PRI port(s)

30 Voice resource(s)

128K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

8192K bytes of processor board Boot flash (Read/Write)

Configuration register is 0x2102

-------------------

#sh vfc 1 board

VFC board state is UP, vfc status VCWARE running(0x4)

VFC board in slot 1 with 30 dsps

#sh vfc 1 technology

Technology in VFC slot 1 is C549

#sh vfc 1 directory

Files in slot 1 VFC flash:

File Name Size (Bytes)

1 . vcw-vfc-mz.c549.hc.9.20a.bin 404348

2 . btl-vfc-l.0.1.bin 1882

3 . btj-vfc-l.0.1.bin 4174

4 . jbc-vfc-l.3.0.bin 12808

5 . cor-vfc-hc-l.3.6.16al.bin 215994

6 . bas-vfc-hc-l.3.6.16al.bin 210

7 . fax-vfc-hc-l.3.6.16al.bin 23764

8 . cdc-g711-hc-l.3.6.16al.bin 2406

9 . cdc-g726-hc-l.3.6.16al.bin 5602

10. cdc-g729-hc-l.3.6.16al.bin 31782

11. cdc-g728-hc-l.3.6.16al.bin 22198

12. cdc-g723.1-hc-l.3.6.16al.bin 33024

13. cdc-gsmfr-hc-l.3.6.16al.bin 9282

14. cdc-gefr-hc-l.3.6.16al.bin 28536

#sh vfc 1 version dspware

Version of Dspware in VFC slot 1 is 3.6.16aL

#sh vfc 1 version vcware

Voice Feature Card in Slot 1:

VCware Version : 9.20a

ROM Monitor Version: 1.3

DSPware Version : 3.6.16aL

Technology : C549

r-simpson · ‎12-05-2002

The same bug has been observed previously, in AS5300 and the IOS version 12.2(2)XB6. The bug IDs are:

CSCdu13089 & CSCdr20101.

Hope this helps.

yanghy · ‎01-03-2003

You can try to upgrade the ios of your GW.i have a gw with two VFCs.There was same problem before i had upgraded the version of IOS to "122-7c".Now ,everything is ok! Please look at the message as below:

gw1>sh ver

Cisco Internetwork Operating System Software

IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)

Compiled Fri 10-May-02 18:18 by pwade

Image text-base: 0x600089B0, data-base: 0x60F1E000

ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTLDR: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE SOFTWARE (fc1)

sccd-c-gw1 uptime is 20 weeks, 1 day, 14 hours, 30 minutes

System returned to ROM by reload at 01:35:44 CST Thu Aug 15 2002

System restarted at 01:36:19 CST Thu Aug 15 2002

System image file is "flash:c5300-is-mz.122-7c.bin"