I have a couple of phones connected to this CUCME 2811 router. They can easily dial between each other (1000 - 1001, 1001 to 1000) but when I try and dial the SIP server (An Asterisks box sitting on the internet) dial peer (7001) I get the error message "Number doesn't exist". Same as if I dial a 9 or an 8 first.
Here is my dial peer config:
dial-peer voice 1 voip
destination-pattern 7...
session target ipv4:107.155.1.2
Here is my ephone config:
ephone-dn 1
number 1000 secondary 7002
label Thomas
description Thomas
ephone-dn 3
number 1001
label Receptionist
description Receptionist
ephone 1
mac-address 0017.E0B2.79DC
ephone 2
mac-address 0017.E0B2.79AB
button 1:3
Here is my telephony-service config:
telephony-service
max-ephones 24
max-dn 48
ip source-address 10.2.1.1 port 2000
max-conferences 8 gain -6
web admin system name admin secret 5 $nope
dn-webedit
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
