cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
88
Views
10
Helpful
2
Replies
Beginner

Cisco CUCME 8.0 dial peer not working

I have a couple of phones connected to this CUCME 2811 router. They can easily dial between each other (1000 - 1001, 1001 to 1000) but when I try and dial the SIP server (An Asterisks box sitting on the internet) dial peer (7001) I get the error message "Number doesn't exist". Same as if I dial a 9 or an 8 first. 

 

Here is my dial peer config:

dial-peer voice 1 voip
 destination-pattern 7...
 session target ipv4:107.155.1.2
 

Here is my ephone config:

 

ephone-dn  1
 number 1000 secondary 7002
 label Thomas
 description Thomas

ephone-dn  3
 number 1001
 label Receptionist
 description Receptionist

ephone  1
 mac-address 0017.E0B2.79DC

ephone  2
 mac-address 0017.E0B2.79AB
 button  1:3

 

Here is my telephony-service config:

telephony-service
 max-ephones 24
 max-dn 48
 ip source-address 10.2.1.1 port 2000
 max-conferences 8 gain -6
 web admin system name admin secret 5 $nope
 dn-webedit
 transfer-system full-consult
 create cnf-files version-stamp Jan 01 2002 00:00:00

 

 

 

 

2 REPLIES 2
Hall of Fame Cisco Employee

This is Video Over IP, please

This is Video Over IP, please move this to a relevant area

HTH

java

if this helps, please rate
Beginner

The big thing I see is your

The big thing I see is your dial-peer isn't complete:

dial-peer voice 1voip
 destination-pattern 7....
 session protocol sipv2
 session target ipv4:107.155.1.2
 dtmf-relay rtp-nte
 codec g711ulaw

 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards