cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

162
Views
5
Helpful
2
Replies

Cisco DX80 with MRA registration issue

Hi,

We are having Cisco DX80 CE 9.5.2 and CUCM 10.5.2.

Need to register the DX80 using MRA.

Configured below.

 

CUCM

1. Configured in CUCM.

2. Associated the End User

DX80:

  1. LoginName: <UserID>
  2. Mode: Edge
  3. Password: <Password>
  4. Domain: <yourdomain.com>
  5. Protocol: HTTPS

Still it's not working from MRA.

Everyone's tags (1)
2 REPLIES 2

Re: Cisco DX80 with MRA registration issue

Does an equivalently configured IP Phone register and function successfully? Does Jabber? If not then you likely have a config issue with your Expressway MRA setup or the firewall/NAT surrounding it:
https://www.cisco.com/c/en/us/support/unified-communications/expressway-series/products-installation-and-configuration-guides-list.html

Re: Cisco DX80 with MRA registration issue

Thanks for your response.

It's registering internal network and Jabber also working in MRA.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards